Pallmann Pall-X WhiteSeal Sealer

Additional information



Atlanta Office: (678) 691-0533

Boise Office: (208) 982-5749

Spokane Office: (509) 921-5585

Key Beneifts of Pall-X WhiteSeal

  • Dries quick
  • White wood look
  • Tannin blocking
  • Can be abraded

If you want to achieve a lighter, whiter look for your wood flooring, Pallmann Whiteseal is a product that you should consider using. This sealer is designed to lighten and whiten your floor after it has been sanded, giving it a fresh and bright appearance.

Like other white sealers, Pallmann Whiteseal can be a little more challenging to use due to the white pigment that it contains. It is recommended to use two coats of this sealer to ensure that you get the best possible results. PALL-X WHITESEAL is a single-component waterborne sealer that seals raw or stained wood and adds an extra layer of protection. Its unique formula reacts with most wood species to provide a white or arctic look. Whether you are a professional flooring contractor, Pallmann Whiteseal is a reliable and effective choice for any wood flooring project that requires a lighter, whiter finish.

Pallmann Pall-X WhiteSeal Inspiration Photos

Arboritec Classic+ Photo 1
Arboritec Classic+ Photo 4
Arboritec Classic+ Photo 2
Arboritec Classic+ Photo 3

Pallmann Pall-X WhiteSeal FAQ’s

Why does Pallmann recommend 2 thin coats?2022-08-21T17:52:46+00:00

Since the Pall-X WhiteSeal has white pigament in it, if you apply the finish too thick it will become whiter in areas. Going super thin gets rid of this issue.

Does the floor actually look white?2022-08-21T17:50:48+00:00

Yes, Pallmann Pall-X WhiteSeal makes the floor look whitewashed or a Nordic look.

Is WhiteSeal hard to apply?2022-08-21T17:49:38+00:00

It is not as easy as color or clear to apply. However, if you do 2 thin coats with a roller and are conscious about the edges you will find you have no problems.

Technical Specs for Pall-X WhiteSeal

Coverage Approx. 500-550 sq ft per gallon
Storage & Working Temp: Store between 50° and 70°F (10-20°C)* and apply at room temperature 65-75°F (18-25°C) for best results**
Application Tools: Roller is perferred
Defoaming: Excellent
Leveling: Ok
Fully Cured: After approx. 5 days**
Foot Traffic: After approx. 3-4 hours**
Drying Time: Approx. 2-3 hours**
Pot Life: 4 Hours
Packaging 1 U.S. plastic gallon
Clarity: Clear when dry, non-yellowing (not UV sensitive)
Stability: Min. 12 months*
VOC Content: VOC does not exceed 250grams per liter
Solids: 34%
Odor: Non-offending
Color Milky when wet, clear when dry


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Go to Top