Pallmann Pall-X NatureSeal Sealer

Additional information



Atlanta Office: (678) 691-0533

Boise Office: (208) 982-5749

Spokane Office: (509) 921-5585

Key Beneifts of Pall-X NatureSeal

  • Natural wood look
  • Roller applied
  • Can be buffed
  • No tannin pull

If you want your finished wood floor to have a natural, unsanded look, Pallmann Natureseal is a sealer that you should consider. This sealer is easy to use and produces a floor with minimal color change from the raw, sanded look. It also provides a good build for the finish, so you can trust that it will provide reliable protection for your wood flooring.

We recommend using two coats of Pallmann Natureseal before applying the final finish. This will help to ensure that you get the best possible results. PALL-X NATURESEAL is a single-component waterborne sealer that seals raw or stained wood and adds an extra layer of protection. It is ideal for use on lighter color wood species or when you want to maintain the appearance of untreated wood. Overall, Pallmann Natureseal is a reliable and effective choice for any wood flooring project.

Pall-X NatureSeal Inspiration Photos

Pallmann Pall-X NatureSeal Photo 2
Pallmann Pall-X NatureSeal Photo 3
Pallmann Pall-X NatureSeal Photo 2

Pallmann Pall-X NatureSeal FAQ’s

What will happen if I use a t-bar or other method instead of a roller?2022-08-21T04:42:30+00:00

We find that you can not get the sealer thin enough without the proper roller. A t0bar will leave start and stop marks as it is very hard to get it perfect film thickness.

What color does this sealer make the wood look like?2022-08-21T04:40:22+00:00

Raw unsanded wood is what the look of Pall-X NatureSeal produces.

Is Pall-X NatureSeal hard to apply?2022-08-21T04:39:13+00:00

Yes, Pall-X NatureSeal is harder to apply than say a Pallmann Color and Clear sealer. After using the normal sealers you are spoiled as the pigamented sealers are harder to use since a heavy spot will appear whiter.

How do you properly apply Pall-X NatureSeal?2022-08-21T04:36:40+00:00

Using a Pallmann roller is the proper way. You also need to do 2 coats. Make sure each coat is thin. Then apply 2-3 top coats after.

Technical Specs for Pall-X NatureSeal

Coverage Approx. 500-550 sq ft per gallon
Storage & Working Temp: Store between 50° and 70°F (10-20°C)* and apply at room temperature 65-75°F (18-25°C) for best results**
Application Tools: Roller is perferred
Defoaming: Excellent
Leveling: Ok
Fully Cured: After approx. 5 days**
Foot Traffic: After approx. 3-4 hours**
Drying Time: Approx. 2-3 hours**
Pot Life: 4 Hours
Packaging 1 U.S. plastic gallon
Clarity: Clear when dry, non-yellowing (not UV sensitive)
Stability: Min. 12 months*
VOC Content: VOC does not exceed 250grams per liter
Solids: 34%
Odor: Non-offending
Color Milky when wet, clear when dry


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Go to Top