Pallmann P7

Home/Pallmann/Pallmann P7

Additional information



Atlanta Office: (678) 691-0533

Boise Office: (208) 982-5749

Spokane Office: (509) 921-5585

Key Beneifts of P7 Adhesive

  • Easy to apply
  • No mixing
  • Bonds well to concrete, gypsum concrete, plywood, OSB, and properly prepared leveling and patching compounds
  • Freeze/thaw stable 0 ̊F and above

If you need an adhesive for a wide wood flooring installation, the Pallmann P7 Adhesive may be the perfect solution. This glue can be used on any wood product and offers unlimited length and width for your installation.

Pallmann P7 is a 1-component polyurethane rapid-setting adhesive with firm ridging and superior green grab. Its foam expansion technology helps to reduce the risk of hollow spots, making it suitable for use with all types of wood flooring. Whether you are a professional contractor or working on a flooring project as a DIY enthusiast, Pallmann P7 Adhesive is a reliable and effective choice.

To be used on:

  • Solid wood flooring with no limitations on width or length
  • Engineered wood flooring with no limitations on width or length
  • Exotic species
  • Wood flooring on radiant heat systems
  • Wood flooring on most subfloors with adequate strength – such as concrete, fortified gypsum concrete, plywood, OSB

Pallmann P7 FAQ’s

Does Pallmann P7 have moisture barrier included in the glue?2022-08-21T02:50:30+00:00

No, Pallmann does not believe in intergrated moisture barrier as it doesn’t always work as intended and causes many issues with other brands moisture control that is impregnated into the glue itself.

What width plank can P7 glue be used for?2022-08-21T02:48:05+00:00

P7 adhesive is able to be used on any width plank flooring that is 3/4″ and down.

What trowel do I need to use for P7 glue?2022-08-21T02:46:19+00:00

Simple, b11 is the trowel to use for p5 and p7 glue.

Does Pallmann P7 spread easily?2022-08-21T02:44:47+00:00

Yes, P7 adhesive does spread easily. In fact, you are able to pour this glue out of the bucket – its that easy to spread.

Technical Specs for Pallmann P7

Packaging 3 gallon metal pail
Working Time: Approx 30 – 40 minutes*
Stability: Min. 12 months
Color Beige
Load bearing: After approx 24 hours*
Sanding / Finishing: After approx 24 hours*
Coverage 65 sq. ft per gal / 195 sq. ft per pail (using B11 trowel)
Final Strength: After 3 – 5 days*
Freeze / Thaw Stable: 0°F and above
VOC Content: Does not exceed 10 grams per
Working °F / C:  Min. 60 – 85°F (15 – 25°C) min. 60°F at floor level


There are no reviews yet.

Be the first to review “Pallmann P7”

Your email address will not be published. Required fields are marked *

Go to Top