Arboritec First Coat Sealer

Additional information



Atlanta Office: (678) 691-0533

Boise Office: (208) 982-5749

Spokane Office: (509) 921-5585

Key Beneifts of First Coat

  • Great Clear Color
  • Fast Drying – 30 min
  • Easy to apply
  • Sandable

When you need to seal a floor, you want a product that is easy to apply and gives you great results. Arboritec First Coat fits the bill perfectly – it’s simple to use and produces beautiful finishes on any wood species. This sealer is made with nanotechnology and ceramic particles, which work together to create a strong and attractive finish. The ceramic fortified coat penetrates deeper into the wood, resulting in better adhesion and a more scratch-resistant and durable finish.

One of the standout features of Arboritec First Coat is its fast cure time – it takes just three days to fully harden. This means that you can get back to work on the next coat of finish more quickly, saving time and effort. And because the sealer bonds well to all types of wood, you can use it confidently on any project. In terms of application, the sealer has exceptional flow and leveling properties, making it easy to apply and ensuring a flawless finish with no ripples or lines. And although the coat dries hard, it is still easy to abrade to ensure good adhesion for the next coat. All in all, Arboritec First Coat is a top-performing sealer that is sure to exceed your expectations.

First Coat Inspiration Photos

Arboritec First Coat Photo 3
Arboritec First Coat Photo 4
Arboritec First Coat Photo 2
Arboritec First Coat Photo 1

Arboritec First Coat FAQ’s

What does First Coat look like on wood?2022-08-13T04:09:53+00:00

While everyone’s opinion is different… we would say this sealer looks like a Pallmann Clear, Loba EasyPrime or Bona ClassicSeal. First Coat is clear in appearance but does look like finish on the floor and isn’t a raw wood floor look.

Does First Coat go bad after using it?2022-08-13T04:07:10+00:00

No, First Coat Sealer is a 1-component sealer that is not mixed. This means this sealer can be used on multiple jobs and is good for 6-12 months after opening.

Can you put First Coat on stain?2022-08-13T04:05:18+00:00

You are able to put Arboritec First Coat sealer on top of stain. However, we recommend skipping sealer or using Vibrant sealer to make the stain pop more.

Is First Coat Sandable before recoating?2022-08-13T04:04:10+00:00

Yes, you are able to sand First Coat sealer. We recommend using 180g or 220g to intercoat abrade with. You are also able to hot coat this sealer.

How do you apply First Coat sealer?2022-08-13T04:02:49+00:00

You are able to apply Arboritec First Coat however you normally apply waterbased sealer. We recommend rolling or t-bar.

Technical Specs for Arboritec First Coat

Coverage Approx. 400 – 500 sq ft per gallon
Storage & Working Temp: Store between 50° and 70°F (10-20°C)* and apply at room temperature 65-80°F (18-25°C) for best results**
Application Tools: T-Bar applicator, brush, cut-in pad or waterborne roller.
Defoaming: Excellent
Leveling: Exceptional
Fully Cured: After approx. 3 days**
Foot Traffic: After approx. 2-3 hours**
Drying Time: Approx. 30-60min hours**
Pot Life: Infinite
Packaging 1 U.S. plastic gallon
Clarity: Clear when dry, non-yellowing (not UV sensitive)
Stability: Min. 12 months*
VOC Content: VOC does not exceed 80 grams per gallon
Gloss Level (60˚): N/A
Sheens: N/A
Solids: 32%
Odor: Non-offending
Color Milky when wet, clear when dry
Recommoned Uses: Residential & Commercial


There are no reviews yet.

Be the first to review “Arboritec First Coat Sealer”

Your email address will not be published. Required fields are marked *

Go to Top