Additional information
| Grit | 100g, 120g, 150g, 180g, 220g, 240g |
|---|---|
| Brand | Norton |
Norton PSA Rolls are a convenient and effective way to fine sand coatings on wood floors. These rolls are made of aluminum oxide and come in two grit sizes: 180g and 220g. They are perfect for inter-coat abrasion or repairs, and are easy to use on any job.
One of the standout features of Norton PSA Rolls is their unique scratch pattern. Unlike traditional screens, which can leave circular scratches, these rolls do not produce any visible scratches at all. This is because the grains of aluminum oxide are small and not very coarse, so they do not leave any noticeable marks on the wood surface.
Overall, Norton PSA Rolls are a valuable tool for anyone looking to achieve a smooth, professional finish on their wood flooring projects. Whether you are a professional contractor or a DIY enthusiast, these rolls can help you get the job done right.
Norton PSA Roll Advantages
- Super fine grain
- Very smooth sanding
- Sticky backing to attach to anything
- Compact roll
Norton PSA Roll Help & FAQ’s
Absolutely. We offer Norton flooring gym roll sandpaper in both Red Heat and Orange Blaze. We stock all the grits at all times. Have a rough floor, buy 16g, or start with 50g on an easy to sand floor.
Yes, we offer gym flooring paint. Our paint is Bona paint and offers a great build, look and is usually spec’d in most jobs.
Yes, we offer Bona branded products for all your gym floor oil-bsed flooring finish and water-based flooring finish needs. The Bona brand is great for all gym floors and provides a great finish for all gym floors.
Unlike hardwood, LVP cannot be sanded and refinished; damaged sections usually need to be replaced.
Yes, LVP is pet-friendly as it is resistant to scratches and easy to clean.
While it is more scratch-resistant than hardwood, it can still be scratched by sharp objects.
LVP is generally more budget-friendly than hardwood flooring. If it isn’t hardwood flooring is superior.
Yes, LVP is waterproof and can be installed in wet areas without worry of damage.
LVP is highly durable, waterproof, easy to clean, and comes in a wide variety of styles and colors
LVP is typically thicker, more durable, and more realistic in appearance than traditional vinyl flooring.
Yes, LVP is compatible with radiant heating systems, but specific guidelines should be followed during installation to ensure proper performance.
Although the installation phase itself doesn’t typically generate dust, the removal of old flooring materials can. Even carpets can harbor a significant amount of dust and dirt. When carrying them outside, you’ll likely observe dust particles in the air. To minimize dust in areas where installation isn’t taking place, it’s advisable to use plastic barriers or coverings.
While DIY installation is possible for those with the right skills and tools, it’s often recommended to hire a professional to ensure a proper and long-lasting installation.
The best installation method depends on factors like the type of hardwood, the subfloor, and your preferences. Consult with a professional installer to determine the most suitable method for your specific situation.
Subfloor preparation includes ensuring it’s clean, level, and dry. Any imperfections should be addressed, and a moisture barrier may be necessary, especially over concrete.
Yes, you can install engineered hardwood floors over a concrete slab or in a basement because they are less prone to moisture-related issues compared to solid hardwood.
Yes, it’s essential to acclimate hardwood flooring to the room’s temperature and humidity for a specified period, usually around 3-7 days, to prevent expansion or contraction after installation.
Solid hardwood is typically nailed or stapled down, while engineered hardwood can be nailed, stapled, glued, or even floated, making it more versatile for various installation methods.
The installation time for hardwood floors varies based on the size of the area, the complexity of the job, and the type of installation. On average, it may take a few days to a week. Typically an installer does 300-500 sq ft a day depending on the width of the wood. This does not include the sanding portion.
Dust can be an issue if the professional lacks the appropriate equipment. However, when equipped with the right tools, the dust generated during the refinishing process is comparable to what you might encounter on a typical day in a household. Modern vacuum systems are highly efficient and effectively capture dust. It’s worth noting that most professional hardwood floor sanders utilize specialized vacuums designed for this purpose, which are far more effective than standard household vacuums.
Yes, you can change the color of your hardwood floors by using a different stain during the refinishing process. This allows you to update the look of your floors to match your decor.
Yes, it’s essential to clear the area of furniture and vacate the premises during the refinishing process for safety and to allow the professionals to work efficiently.
The time it takes to refinish hardwood floors depends on factors like the size of the area, the condition of the floors, and the number of coats needed. On average, it can take 2-5 days, including drying times.
The typical steps in hardwood floor refinishing include sanding, staining (if desired), and applying a finish coat. Sanding removes the old finish and imperfections, staining adds color, and the finish coat provides protection and sheen.
While some homeowners with DIY skills may attempt hardwood floor refinishing, it is often best left to professionals. DIY refinishing can lead to uneven results, damage, or even costly mistakes.
You should consider refinishing your hardwood floors when they show signs of wear, such as deep scratches, dullness, or when the existing finish starts to wear off. Typically, this occurs every 7-10 years, but it depends on foot traffic and maintenance.
Hardwood floor refinishing is the process of sanding down the top layer of your hardwood floors to remove scratches, stains, and imperfections, followed by applying a new finish to restore their beauty and protect them.
Unlike traditional wood finishes that require multiple layers, Rubio Monocoat Oil Plus 2C requires only a single coat, thanks to its innovative molecular bonding technology. This not only saves time but also reduces the amount of product used. Additionally, it’s environmentally friendly, free from volatile organic compounds (VOCs), and available in a variety of colors.
Yes, Rubio Monocoat Oil Plus 2C is suitable for refinishing and renovating old or previously treated wood surfaces. It’s effective in removing old residues and refreshing the look of the wood. However, it’s important to sand down the existing finish to bare wood and ensure the surface is clean and dry before applying the oil.
Maintenance for Rubio Monocoat Oil Plus 2C treated surfaces is straightforward. Regular cleaning with Rubio Monocoat Soap or Surface Care Spray is recommended. For periodic maintenance or to refresh the finish, applying Rubio Monocoat Renew is advised. The product’s low maintenance and easy repairability make it a practical choice for both residential and commercial settings.
Rubio Monocoat Oil Plus 2C is highly environmentally safe. It’s formulated to be free of harmful chemicals and VOCs, making it a healthier choice for indoor environments. This eco-friendly aspect ensures a safer application process and contributes to better indoor air quality, aligning with contemporary sustainability and health concerns.
It’s important to apply only a light mist to your floor during cleaning. Excess moisture, regardless of the amount, can be detrimental, as it introduces unnecessary water to your flooring. This is true even for waterproof floors – using less water is always the better option. As a general guideline, a few sprays should suffice for an area of about 100 square feet. This method ensures effective cleaning without the risk of water damage.
Regrettably, a significant number of floor cleaners available in the market today tend to leave behind polymers, which can adversely affect the appearance of your floors. Over time, these residues can cause the floor’s finish to become uneven, peel, or develop a sticky and smudgy texture. To maintain the pristine condition of your hardwood or luxury vinyl plank flooring, we strongly recommend using a pH-neutral cleaner. Such cleaners are gentle on the flooring, preserving its natural look and feel without the risk of damage caused by harsh chemical residues.
The angled cut-in pads are designed for precision work and getting into tight spaces, while the square edge pads are better for longevity and are less prone to ripping during use.
Duratool applicators are designed for long-term use. With proper cleaning and maintenance, they can be reused multiple times, making them a cost-effective option.
Yes, Duratool offers a variety of applicators, including cut-in pads and T-bar refills. These come in different sizes and styles to suit specific project needs.
Duratool applicators are designed to work with a wide range of finishes, including both water-based and oil-based products. They are versatile tools suitable for various types of hardwood floor finishes.
Duratool is renowned for offering the most consistent applicators in the industry. Their cut-in pads and T-bar refills are versatile, working effectively with nearly every type of finish. These pads, with their millions of bristles, perform exceptionally well, underscoring their high quality and efficiency in application.
Yes, you can typically find wood vents available in different species of hardwood to match or complement various hardwood flooring options. The goal is to provide a cohesive and coordinated look throughout your flooring installation. Here are some key points to consider:
- Matching Species: Many manufacturers offer wood vents in the same hardwood species as their flooring products. This allows you to achieve a seamless appearance, ensuring that the vents blend harmoniously with the surrounding flooring.
- Customization Options: Some suppliers may also provide customization options, allowing you to order wood vents in a specific hardwood species that matches your flooring choice. This can be particularly useful if you have exotic or less common hardwood flooring.
- Variety of Choices: Common hardwood species used for both flooring and vents include oak, maple, cherry, hickory, and walnut. Depending on the supplier, you may find vents in a variety of wood species to accommodate different design preferences.
- Stain and Finish Options: In addition to different wood species, wood vents often come with various stain and finish options. This allows you to further tailor the appearance of the vents to match the color and finish of your hardwood flooring.
When shopping for wood vents, check with flooring suppliers or specialty vent manufacturers. They may offer a range of options to ensure you find the right vents for your specific hardwood flooring installation.
It’s important to note that the availability of wood vents in different species can vary depending on the supplier and the region. If you have a specific hardwood species in mind, inquire with the supplier or manufacturer to confirm the options they offer.
Yes, wood vents can typically be sanded along with the rest of the wood flooring if the need arises for refinishing. Wood vents are made from solid wood, and like the rest of the hardwood floor, they can be sanded to remove scratches, dents, or other imperfections and then refinished to restore their appearance.
When sanding wood vents or any part of your hardwood floor, there are a few considerations to keep in mind:
- Thickness: Ensure that the wood vents have sufficient thickness to withstand sanding. Thicker vents generally offer more material to work with during the refinishing process.
- Professional Assistance: If you’re not experienced with sanding and refinishing hardwood floors, it’s advisable to seek professional help. Improper sanding techniques can damage the wood, and a professional can ensure a smooth and even result.
- Careful Handling: When sanding around vents, be cautious to avoid damaging the surrounding flooring or the vent itself. Carefully tape off the edges of the vents to protect them during the sanding process.
- Finishing: After sanding, you’ll need to apply a new finish to protect the wood. This could involve staining the wood to achieve a desired color and then applying a protective sealant.
Keep in mind that not all wood vents are created equal, and the ability to sand them may depend on the specific product and its construction. Cheaper or thinner vents may have limitations regarding the number of times they can be refinished. If you’re planning to refinish your hardwood floor in the future, it’s a good idea to choose high-quality wood vents that can withstand multiple sanding and refinishing processes.
Always follow the manufacturer’s guidelines for sanding and refinishing your specific wood vents, and consider consulting with flooring professionals for the best advice based on your specific situation.
Wood flooring vents designed for solid hardwood are typically sturdy and durable. These vents are crafted to withstand the normal stresses and loads associated with flooring materials. The strength of these vents is influenced by factors such as the type of wood used, the manufacturing process, and the overall design.
Here are some considerations regarding the strength of wood flooring vents for solid hardwood:
- Wood Type: The type of wood used in the construction of the vents plays a significant role in their strength. Hardwoods such as oak, maple, or cherry are commonly used for this purpose due to their durability and resistance to wear.
- Construction Quality: Well-constructed wood flooring vents are designed to be strong and reliable. High-quality vents are made from solid wood and are carefully crafted to withstand the weight and traffic associated with flooring.
- Thickness: The thickness of the vent is an important factor. Thicker vents tend to be more robust and less prone to damage or warping.
- Finish and Coating: The finish applied to the vents can impact their strength and resilience. A durable finish or coating helps protect the wood from moisture, scratches, and other potential sources of damage.
- Installation: Proper installation is crucial for ensuring the strength of wood flooring vents. When installed correctly, these vents become an integral part of the flooring, contributing to the overall strength and stability of the floor.
It’s essential to choose high-quality wood flooring vents from reputable manufacturers or suppliers. Additionally, following the manufacturer’s guidelines for installation and maintenance will help ensure the longevity and strength of the vents. If you have specific concerns or requirements for strength, you may want to inquire about the specifications of the vents with the manufacturer or retailer.
Flush mount hardwood flooring vents, also known as flush-mount registers or grilles, offer several advantages when installed in a space with hardwood floors. Here are some reasons why they are considered beneficial:
- Aesthetics: Flush mount vents seamlessly blend with the hardwood flooring, providing a clean and unobtrusive look. Traditional surface-mounted vents can disrupt the visual continuity of the floor, whereas flush mount vents are designed to be inconspicuous.
- Smooth Surface: Unlike surface-mounted vents that can create tripping hazards or catch dust and debris, flush mount vents create a smooth and even surface. This can be especially important for areas with heavy foot traffic or where furniture is moved frequently.
- Improved Airflow: Flush mount vents are designed to provide efficient and even airflow throughout the room. The vents are positioned flush with the floor, allowing air to circulate without obstruction. This can help maintain a more consistent temperature throughout the space.
- Enhanced Comfort: Proper ventilation is essential for maintaining a comfortable indoor environment. Flush mount vents contribute to the effectiveness of your HVAC system by ensuring that conditioned air can flow freely, helping to regulate the temperature in the room.
- Customization: Flush mount vents come in various materials and finishes, allowing you to choose one that complements your hardwood flooring. This customization option can enhance the overall design and aesthetics of your space.
- Durability: Quality flush mount vents are typically made from durable materials that can withstand the stresses of daily use. This ensures that they remain functional and maintain their appearance over time.
- Easy Cleaning: Flush mount vents are generally easier to clean than surface-mounted alternatives. Their design reduces the likelihood of dirt, dust, and debris accumulating around the edges, making maintenance simpler.
While flush mount hardwood flooring vents offer these benefits, it’s essential to ensure proper installation. Professional installation is recommended to ensure a seamless integration with the flooring and optimal performance.
This is a common question mm is for the total lvp thickness. and mil is for the thickness of the wear layer.
- It is important to ensure the luxury vinyl flooring planks are snapped in correctly.
- Sub floor needs to be in spec of 3/16 over 8 feet. This ensures that the floor is flat and wont crack/break.
Maintaining a stone content of over 65% is crucial to ensure the stability of luxury vinyl plank flooring, preventing shifts with seasonal weather changes. By prioritizing a higher stone content, you can be confident that the flooring will endure for decades, providing lasting durability and resilience.
Yes, American Cherry’s versatile color palette and distinctive grain patterns make it adaptable to various design styles, from traditional to contemporary, providing homeowners with a flooring option that suits diverse aesthetic preferences.
While American Cherry is often left in its natural state to showcase its inherent beauty, it can be stained to achieve a desired color, offering homeowners flexibility in customizing the flooring to match their design vision.
American Cherry hardwood infuses spaces with a sense of elegance and warmth, creating a welcoming atmosphere and making it an ideal flooring choice for those seeking both beauty and character in their homes.
American Cherry hardwood flooring is cherished for its warm reddish-brown tones and unique grain patterns, providing a timeless and sophisticated aesthetic that adds richness to any interior space.
Absolutely, Yellow Birch’s inherent durability and resistance to wear make it an ideal choice for high-traffic areas, ensuring a flooring solution that maintains its beauty and resilience in areas prone to daily use.
Yes, Yellow Birch hardwood readily accepts stains, providing homeowners with the flexibility to customize their flooring’s appearance and achieve a desired color that aligns with their unique design vision.
Yellow Birch exhibits excellent stability, minimizing the risk of warping or cupping in response to fluctuations in humidity and temperature, making it a reliable and enduring choice suitable for different climates.
Yellow Birch hardwood stands out for its warm golden hues and intricate grain patterns, creating a flooring option that radiates natural beauty and adds character to any space.
White Oak’s enduring appeal and durability enhance a home’s overall aesthetic and resale value, making it a valuable investment that not only beautifies living spaces but also adds long-term value to the property.
Yes, White Oak’s remarkable hardness and resistance to wear make it a practical choice for active households with pets and children, ensuring the flooring maintains its beauty and withstands daily foot traffic.
Absolutely, White Oak hardwood readily takes on stains and finishes, allowing homeowners to customize the flooring’s appearance and achieve a desired color that aligns with their interior design preferences.
White Oak’s neutral tones and subtle grain patterns provide a timeless and versatile aesthetic that complements various design styles, and its exceptional durability ensures a long-lasting and resilient flooring option for homes.
Yes, Red Birch hardwood exhibits stability and resistance to warping or cupping in response to changes in humidity, making it a versatile and reliable flooring option suitable for diverse climates and regions. Although this wood is not as stable as white or red oak.
Yes, Red Birch hardwood readily accepts various finishes, allowing homeowners to personalize their flooring with stains and coatings to achieve the desired color and sheen that aligns with their interior design vision.
Red Birch hardwood boasts excellent durability, making it suitable for high-traffic areas; its natural resistance to dents and scratches ensures a resilient and long-lasting flooring solution for busy households.
Red Birch hardwood is favored for its warm and rich reddish-brown tones, coupled with unique and pronounced grain patterns, offering a distinctive and visually appealing flooring option that adds character to any space.
Maple hardwood’s timeless appeal, durability, and potential for customization enhance a home’s overall aesthetic and resale value, making it an investment that not only beautifies living spaces but also adds value to the property.
Absolutely, Maple hardwood readily accepts stains, allowing homeowners to customize the flooring to achieve a desired color that harmonizes with existing interior elements and personal design preferences.
Yes, Maple hardwood is a resilient choice for households with pets and children due to its hardness, offering resistance to dents and scratches, making it a durable and practical flooring option for active households.
Maple hardwood flooring is valued for its light and neutral tones, providing a clean and timeless aesthetic that easily adapts to various design styles, and its inherent durability ensures long-lasting beauty in your living spaces.
Yes, Hickory hardwood is receptive to staining, allowing homeowners to customize their flooring’s appearance and achieve a desired color that complements their unique design vision.
Hickory hardwood is known for its stability, making it less prone to warping or cupping in response to environmental changes, offering homeowners a flooring option that adapts well to different climates.
Yes, Hickory hardwood’s exceptional hardness and durability make it an excellent choice for high-traffic areas, ensuring resistance to dents and wear and maintaining its aesthetic appeal over the long term.
Hickory hardwood is sought after for its unique blend of distinctive grain patterns and natural color variations, providing a visually dynamic and rustic charm that appeals to those seeking a flooring option with character and individuality.
Yes, Ash hardwood is receptive to staining, offering homeowners the flexibility to customize their flooring’s appearance and achieve a desired color that complements their unique design preferences.
Ash hardwood is known for its excellent stability, minimizing the risk of warping or cupping in response to fluctuations in humidity and temperature, ensuring a reliable and resilient flooring option for different climates.
Yes, Ash hardwood’s exceptional durability makes it an ideal choice for high-traffic areas, providing a long-lasting flooring solution that maintains its beauty even in areas prone to daily wear and tear.
Ash hardwood is distinguished by its remarkable hardness, making it resistant to dents and wear, while its pale, creamy color and subtle grain patterns offer a timeless and elegant aesthetic suitable for a range of interior styles.
Yes, Red Oak’s stability and adaptability make it suitable for various climates; its resistance to warping or cupping in response to changes in humidity ensures a reliable and enduring flooring option for homes across different regions.
Red Oak is known for its excellent hardness, providing resistance to dents and wear, making it a durable choice for high-traffic areas and ensuring a flooring solution that stands up well over time.
Yes, Red Oak is highly customizable and takes stains and finishes exceptionally well, providing homeowners the flexibility to achieve a desired color palette and enhance the wood’s natural characteristics.
Red Oak is favored for its timeless beauty, characterized by warm tones and distinctive grain patterns, offering versatility that complements various interior styles, while its durability ensures long-lasting appeal in homes.
The drying and curing times for Bona Water-Based Flooring Sealers can vary depending on several factors, including environmental conditions and the specific product used. However, as a general guideline, most water-based sealers tend to dry relatively quickly compared to oil-based alternatives.
Typically, Bona Water-Based Flooring Sealers may take anywhere from 2 to 3 hours to dry to the touch. However, it’s crucial to note that drying time does not equate to full curing time. While the surface may feel dry after a few hours, it is recommended to allow a longer period for the sealer to cure completely.
For full curing, it is advisable to wait at least 24 hours before allowing light foot traffic. The curing process continues beyond this point, and it’s recommended to wait 3 to 5 days before placing heavy furniture or rugs on the treated surface. Always refer to the specific product’s technical data sheet or instructions provided by Bona for accurate and detailed information tailored to the particular sealer you are using.
Environmental factors such as temperature and humidity can influence drying and curing times. Warmer temperatures and lower humidity levels generally expedite the process, while cooler temperatures and higher humidity may extend the time required for drying and curing.
To ensure optimal results, it’s crucial to follow the manufacturer’s guidelines closely and take into account the specific conditions of the application environment.
The recommended application process for Bona Water-Based Flooring Sealers may vary depending on the specific product you are using. However, here is a general guideline that you can follow:
- Surface Preparation:
- Ensure that the wood surface is clean, dry, and free from dust, dirt, and debris.
- Sand the floor to a smooth finish, and vacuum or wipe away any sanding residue.
- Stir the Sealer:
- Before application, thoroughly stir the Bona Water-Based Flooring Sealer to ensure an even distribution of solids.
- Application:
- Apply the sealer using a high-quality synthetic applicator, brush, or roller. Work in the direction of the wood grain.
- Avoid puddles or excessive application, as uneven application can affect the drying and curing process.
- Drying Time:
- Allow the first coat to dry completely according to the manufacturer’s recommendations. This typically takes a few hours.
- Sanding (Optional):
- Some Bona sealers recommend a light sanding between coats to promote adhesion. Check the product specifications for guidance on sanding between coats.
- Apply Additional Coats:
- Apply additional coats of the sealer as needed, following the same process of thorough stirring and even application.
- Some projects may require multiple coats for optimal results. Check the product instructions for the recommended number of coats.
- Final Drying and Curing:
- Allow the final coat to dry and cure according to the manufacturer’s guidelines. This typically involves waiting at least 24 hours before light foot traffic and several days before heavier use.
Always refer to the specific product’s technical data sheet or application instructions provided by Bona for accurate and detailed information tailored to the particular sealer you are using. The number of coats needed can vary based on factors such as the type of wood, desired level of sheen, and the specific sealer product, so it’s essential to follow the manufacturer’s recommendations for optimal results.
Preparing the floor properly before applying Bona Water-Based Sealer is crucial to ensure optimal adhesion and a successful finish. Here are general steps to prepare the floor, along with considerations for different types of wood or flooring materials:
General Floor Preparation:
- Clean the Surface:
- Ensure that the floor is free from dust, dirt, and debris. Sweep or vacuum thoroughly to remove any loose particles.
- Repair Imperfections:
- Address any imperfections in the wood, such as cracks or gaps. Fill them with an appropriate wood filler and sand the surface to achieve a smooth finish.
- Sand the Floor:
- Sand the entire floor to create a smooth and uniform surface. The level of sanding required may vary depending on the condition of the existing finish and the specific Bona Water-Based Sealer product you are using.
- Remove Sanding Residue:
- After sanding, vacuum or wipe the floor to remove all sanding residue. It’s essential to start with a clean surface to ensure proper adhesion of the sealer.
- Check Moisture Levels:
- Ensure that the moisture content of the wood is within the acceptable range specified by the Bona Water-Based Sealer product. Excessive moisture can affect the performance of the sealer.
Considerations for Different Types of Wood:
- Hardwood vs. Softwood:
- Hardwood and softwood may have different porosities and characteristics. Adjust the sanding process and the amount of sealer applied based on the specific wood type.
- Exotic Woods:
- Exotic woods may have natural oils or resins that can affect adhesion. It’s important to clean the surface thoroughly and, if necessary, use a compatible wood cleaner before applying the sealer.
- Previously Finished Floors:
- If the floor has an existing finish, it’s crucial to remove or adequately prepare the surface before applying the Bona Water-Based Sealer. This may involve sanding or using a compatible finish remover.
- Engineered Wood Floors:
- Follow the manufacturer’s recommendations for engineered wood floors. Ensure that the floor is well-prepared, and any pre-finish coatings are compatible with the water-based sealer.
Always refer to the specific product’s technical data sheet or application instructions provided by Bona for detailed and accurate information tailored to the particular sealer you are using. Additionally, it’s advisable to conduct a small test area before applying the sealer to the entire floor to ensure compatibility and achieve the desired results. If in doubt or if you encounter specific challenges, consulting with a flooring professional can provide valuable guidance.
Bona Water-Based Flooring Sealers offer several advantages over other types of sealers, and these benefits contribute to their popularity in the flooring industry. Here are some key advantages:
- Low VOC Content:
- Bona Water-Based Flooring Sealers typically have a low Volatile Organic Compound (VOC) content. This means they release fewer harmful chemicals into the air during and after application, contributing to better indoor air quality.
- Fast Drying Time:
- Water-based sealers generally dry more quickly than oil-based alternatives. Bona Water-Based Flooring Sealers often have a shorter drying time, allowing for faster project completion.
- Low Odor:
- Compared to oil-based sealers, water-based sealers, including those from Bona, tend to have a milder odor. This can be more pleasant for those applying the sealer and for occupants in the treated space.
- Non-Toxic and Environmentally Friendly:
- Water-based sealers are generally considered more environmentally friendly and less toxic. Bona Water-Based Flooring Sealers are designed to be safe for both the environment and those applying the product.
- Compatibility with Water-Based Finishes:
- Bona Water-Based Flooring Sealers are often designed to work seamlessly with water-based finishes from the same manufacturer. This ensures compatibility and optimal results when using the complete Bona water-based system.
- Clear Finish and Low Yellowing:
- Water-based sealers are known for their ability to provide a clear finish that retains the natural color of the wood. Bona Water-Based Flooring Sealers are formulated to minimize yellowing over time, helping to maintain the original appearance of the wood.
- Durability and Wear Resistance:
- Bona Water-Based Flooring Sealers are designed to provide durable protection to the wood surface. They can enhance the wear resistance of the floor, making it more resilient to daily use and foot traffic.
- Ease of Cleanup:
- Water-based sealers are typically easier to clean up than oil-based alternatives. Tools and equipment can often be cleaned with water, simplifying the overall application process.
While Bona Water-Based Flooring Sealers offer these advantages, it’s essential to note that the choice of sealer depends on various factors, including the specific wood type, project requirements, and personal preferences. Always follow the manufacturer’s guidelines for the best results and consult with flooring professionals if needed.
As of my last knowledge update in January 2022, I don’t have specific information about Bona Gym Floor Paints. However, I can provide you with general features that are typically desirable for gym floor paints in order to create a suitable and durable environment for athletic activities. When considering gym floor paints, look for the following key features:
- Durability:
- Gym floors endure heavy foot traffic, equipment use, and impact from sports activities. A durable paint is crucial to resist wear and tear over time.
- Non-Slip Surface:
- Safety is paramount in a gym environment. Look for paints that provide a non-slip surface to reduce the risk of accidents and injuries during physical activities.
- Easy Maintenance:
- Gym floors should be easy to clean and maintain. Paints that are resistant to scuff marks, stains, and easy to clean contribute to a hygienic and well-kept environment.
- Fast Drying Time:
- Quick-drying paints minimize downtime, allowing the gym to be back in operation sooner. This is especially important in facilities with regular classes or activities.
- Low VOC Content:
- Volatile Organic Compounds (VOCs) can contribute to poor indoor air quality. Low VOC or zero-VOC paints are preferable to create a healthier environment for gym-goers.
- Custom Colors and Design Options:
- Gym owners often want the flexibility to choose colors that match branding or create specific floor designs. Paints that offer a range of colors and design options allow for customization.
- Adherence to Regulatory Standards:
- Ensure that the gym floor paints comply with relevant regulatory standards for indoor sports facilities. This may include considerations for slip resistance, chemical content, and other safety measures.
- UV Resistance:
- If the gym has large windows or receives significant sunlight, UV-resistant paints can help prevent fading and maintain the appearance of the floor over time.
- Compatibility with Wood or Other Flooring Material:
- Gym floors can be made of various materials, including wood, rubber, or synthetic surfaces. Choose a paint that is compatible with the specific flooring material in use.
- Application Flexibility:
- Paints that are suitable for a variety of gym surfaces, including wood, concrete, or synthetic floors, provide versatility for different gym setups.
Before choosing any gym floor paint, it’s essential to check the product specifications, application guidelines, and any specific recommendations from the manufacturer. Additionally, consulting with flooring professionals or specialists in gym floor maintenance can provide valuable insights tailored to your specific facility and needs.
Proper preparation of the gym floor is crucial to ensure the successful application and longevity of Bona Gym Floor Paint. Here are general steps to guide you through the preparation process:
- Clean the Surface:
- Start by thoroughly cleaning the gym floor to remove any dust, dirt, grease, or contaminants. Sweep the floor to remove loose debris and then use a commercial floor cleaner or degreaser to clean the surface. Rinse the floor with clean water and allow it to dry completely.
- Repair Any Damage:
- Inspect the floor for any damage, such as cracks, holes, or uneven areas. Repair and fill these imperfections with an appropriate floor filler or patching compound. Ensure that the surface is smooth and level.
- Sand the Floor:
- Sanding helps create a clean, smooth surface for the paint to adhere to. Use a floor sander to sand the entire gym floor. The level of sanding required may depend on the existing condition of the floor and the type of paint being applied.
- Remove Sanding Residue:
- After sanding, thoroughly clean the floor again to remove any sanding residue. Use a vacuum or damp mop to ensure that the surface is free from dust.
- Test for Moisture:
- Check the moisture content of the gym floor, especially if it is made of wood. Excessive moisture can affect the adhesion and performance of the paint. Follow the manufacturer’s recommendations for acceptable moisture levels.
- Mask and Protect Surrounding Areas:
- Use painter’s tape to mask and protect areas that you do not want to paint, such as walls, equipment, or other structures. This ensures clean and precise application of the paint.
- Apply a Primer (if recommended):
- Some gym floor paints may require the application of a primer to enhance adhesion. Check the product specifications and follow the manufacturer’s recommendations regarding the use of primers.
- Stir the Paint Thoroughly:
- Before applying the Bona Gym Floor Paint, stir the paint thoroughly to ensure an even distribution of pigments and other components. Follow the manufacturer’s instructions on mixing.
- Apply the Paint:
- Use a high-quality paint roller or applicator to apply the Bona Gym Floor Paint. Work in small sections, applying an even coat. Follow the recommended drying times between coats if multiple coats are required.
- Allow Sufficient Drying Time:
- Ensure that each coat is allowed to dry completely before applying additional coats or allowing foot traffic. Follow the manufacturer’s guidelines for drying and curing times.
Always refer to the specific product’s technical data sheet and application instructions provided by Bona for accurate and detailed information tailored to the gym floor paint you are using. Following these preparation steps diligently will help you achieve the best results and ensure the durability of the gym floor paint.
While I don’t have specific information about Bona Gym Floor Paints, the application process and the number of coats needed for optimal results generally follow industry-standard practices for gym floor paints. Here is a general guideline for applying gym floor paints:
Recommended Application Process:
- Surface Preparation:
- Clean the gym floor thoroughly, removing all dust, dirt, and contaminants. Repair any damaged areas, and ensure the surface is smooth and level.
- Priming (if necessary):
- Some gym floor paints may require the application of a primer for better adhesion. Follow the manufacturer’s recommendations regarding the use of primers.
- Stir the Paint:
- Before application, stir the gym floor paint thoroughly to ensure an even distribution of pigments and other components.
- Masking:
- Use painter’s tape to mask and protect areas that you do not want to paint, such as walls or equipment.
- Application:
- Apply the first coat of gym floor paint using a high-quality paint roller or applicator. Work in small sections, and ensure an even application.
- Drying Time:
- Allow the first coat to dry completely before applying additional coats. Drying times may vary, so follow the manufacturer’s recommendations.
- Sand between Coats (if recommended):
- Some gym floor paints may require a light sanding between coats to promote adhesion. Check the product specifications for guidance on sanding.
- Apply Additional Coats:
- Depending on the product and desired results, multiple coats may be necessary. Apply additional coats following the same process, allowing each coat to dry before the next.
- Final Drying and Curing:
- Allow the final coat to dry and cure according to the manufacturer’s guidelines. This may involve waiting at least 24 hours before light foot traffic and several days before heavier use.
Number of Coats:
- The number of coats needed can vary based on factors such as the type of paint, the condition of the floor, and the desired level of coverage. In many cases, two or more coats are applied to achieve optimal results.
Always refer to the specific product’s technical data sheet and application instructions provided by Bona for accurate and detailed information tailored to the gym floor paint you are using. Following the manufacturer’s guidelines is crucial to achieving the best results and ensuring the durability of the gym floor paint.
The drying and curing times for Bona Gym Floor Paints can vary based on factors such as the specific product used, environmental conditions, and the number of coats applied. As of my last knowledge update in January 2022, specific information about the drying and curing times for Bona Gym Floor Paints may not be readily available.
To obtain accurate and up-to-date information regarding drying and curing times for a particular Bona Gym Floor Paint product, I recommend referring to the product’s technical data sheet, application instructions, or contacting Bona directly. These documents usually provide detailed guidelines on application, drying times between coats, and when the floor can be reopened for use.
In general, water-based paints, including those designed for gym floors, tend to have shorter drying times compared to oil-based paints. However, it’s essential to follow the manufacturer’s recommendations for optimal results. Factors such as temperature, humidity, and ventilation in the gym can influence drying and curing times.
Here are some general tips:
- Drying Time:
- The initial drying time for a coat of paint may be relatively quick, often within a few hours.
- Curing Time:
- While the surface may feel dry after a short period, full curing usually takes longer. It’s common for gym floor paints to require at least 24 hours before light foot traffic and several days before heavier use.
- Ventilation and Environmental Conditions:
- Adequate ventilation can help expedite the drying process. Warmer temperatures and lower humidity levels generally promote faster drying and curing.
Always consult the product documentation for the specific Bona Gym Floor Paint you are using, as the information provided may vary between products. Additionally, consider conducting a small test area before applying the paint to the entire gym floor to ensure compatibility and to observe drying characteristics.
Proper preparation of the gym floor is essential to ensure the successful application and performance of Bona Water-Based Finish. Here are general steps for preparing the gym floor, along with considerations for different types of wood commonly used in gym flooring:
General Gym Floor Preparation:
- Clean the Surface:
- Thoroughly clean the gym floor to remove dust, dirt, and any contaminants. Sweeping or vacuuming is usually the first step.
- Repair Imperfections:
- Inspect the floor for any cracks, gaps, or imperfections. Fill these areas with an appropriate wood filler or patching compound and ensure a smooth surface.
- Sand the Floor:
- Sand the entire gym floor to create a smooth, even surface. The level of sanding required may depend on the condition of the existing finish and the specific Bona Water-Based Finish product being used.
- Remove Sanding Residue:
- After sanding, use a vacuum or damp mop to remove any sanding residue. It’s crucial to start with a clean surface to promote proper adhesion of the water-based finish.
- Check Moisture Levels:
- Ensure that the moisture content of the wood is within the acceptable range specified by the Bona Water-Based Finish product. Excessive moisture can affect the performance of the finish.
Considerations for Different Types of Wood:
- Hardwood vs. Softwood:
- Hardwood and softwood may have different porosities and characteristics. Adjust the sanding process and the amount of finish applied based on the specific wood type.
- Exotic Woods:
- Exotic woods may have natural oils or resins that can affect adhesion. Clean the surface thoroughly and, if necessary, use a compatible wood cleaner before applying the water-based finish.
- Maple Flooring:
- Maple is a common wood type used in gym flooring. It’s important to note that maple can be dense and non-porous. Some water-based finishes are specifically formulated for dense woods, so check the product specifications to ensure compatibility.
- Pine Flooring:
- Pine is a softer wood that may require a different approach. Ensure proper sanding to create a smooth surface, and choose a water-based finish suitable for softer woods.
- Engineered Wood Floors:
- If the gym floor is engineered wood, follow the manufacturer’s recommendations for preparation and ensure that the chosen water-based finish is compatible with engineered wood.
Application Specifics:
- Stir the Finish:
- Before applying the Bona Water-Based Finish, stir the product thoroughly to ensure an even distribution of solids.
- Apply the Finish:
- Use a high-quality applicator, such as a synthetic brush or applicator pad, to apply the water-based finish. Work in the direction of the wood grain.
- Allow Drying Time:
- Follow the manufacturer’s guidelines for drying time between coats. Water-based finishes typically have shorter drying times compared to oil-based alternatives.
- Apply Additional Coats (if needed):
- Depending on the desired level of protection, apply additional coats following the same process.
Always refer to the specific product’s technical data sheet and application instructions provided by Bona for accurate and detailed information tailored to the water-based finish you are using. Following these guidelines and considering the wood type will help ensure optimal results and the longevity of the gym floor finish.
The drying and curing times for Bona Gym Water-Based Flooring Finish can vary based on several factors, including environmental conditions, application thickness, and the specific product used. It’s crucial to follow the manufacturer’s recommendations for the particular Bona finish you are using, as formulations may differ. As of my last knowledge update in January 2022, specific information on the drying and curing times for Bona Gym Water-Based Flooring Finish may not be readily available.
In general, water-based finishes tend to have shorter drying times compared to oil-based alternatives. However, complete curing may take longer. Here are some general guidelines, but be sure to refer to the product’s technical data sheet and application instructions for accurate information:
- Drying Time:
- The initial drying time for Bona Gym Water-Based Flooring Finish can typically range from a few hours to overnight for each coat. However, it’s important to check the specific product recommendations, as drying times can vary.
- Curing Time:
- While the surface may feel dry after the initial drying period, full curing can take several days to a couple of weeks. It’s advisable to wait at least 24 hours before allowing light foot traffic and several days before heavy use or the placement of equipment.
- Environmental Factors:
- Temperature and humidity levels can influence drying and curing times. Warmer temperatures and lower humidity levels generally promote faster drying and curing.
- Ventilation:
- Adequate ventilation can help expedite the drying process. Ensure proper airflow during and after the application of the finish.
Always follow the specific guidelines provided by Bona for the particular Gym Water-Based Flooring Finish you are using. The manufacturer’s technical data sheet or application instructions will provide detailed information on drying and curing times, as well as any specific recommendations for the best results.
If you have a specific product in mind or if there have been updates since my last knowledge update in January 2022, I recommend checking with Bona directly or consulting the most recent product documentation for accurate and up-to-date information on drying and curing times.
As of my last knowledge update in January 2022, I don’t have specific details on the drying and curing times for Bona Gym Oil-Based Flooring Finish. The curing time for oil-based finishes can vary based on several factors, including the specific product formulation, environmental conditions, and the application thickness.
In general, oil-based finishes typically have longer drying and curing times compared to water-based finishes. Here are some general guidelines, but it’s crucial to refer to the specific product’s technical data sheet and application instructions for accurate information:
- Drying Time:
- The initial drying time for each coat of oil-based finish can range from overnight to 24 hours. However, it’s essential to check the product specifications, as drying times can vary.
- Curing Time:
- Full curing for oil-based finishes can take several days to weeks. It’s common to wait at least 24 to 48 hours before allowing light foot traffic and several days to a couple of weeks before heavy use or placing equipment on the gym floor.
- Ventilation:
- Adequate ventilation is essential during and after the application of oil-based finishes. Proper airflow helps facilitate the drying and curing process.
- Temperature and Humidity:
- Environmental factors, such as temperature and humidity levels, can significantly impact the drying and curing times. Warmer temperatures and lower humidity levels generally promote faster curing.
Always follow the specific guidelines provided by Bona for the particular Gym Oil-Based Flooring Finish you are using. The manufacturer’s technical data sheet or application instructions will offer detailed information on drying and curing times, as well as any specific recommendations for optimal results.
If you have a specific product in mind or if there have been updates since my last knowledge update in January 2022, I recommend checking with Bona directly or consulting the most recent product documentation for accurate and up-to-date information on drying and curing times for their oil-based finishes.
Maintaining gym floors treated with Bona Oil-Based Finish involves regular cleaning and periodic maintenance to ensure the longevity and appearance of the finish. Here’s a recommended maintenance routine:
Regular Cleaning:
- Sweep or Vacuum Daily:
- Remove dust, dirt, and debris from the gym floor regularly using a soft-bristle broom or a vacuum cleaner with a soft brush attachment.
- Damp Mop Weekly:
- Damp mop the gym floor weekly using a well-wrung, damp microfiber mop. Use a pH-neutral cleaner specifically designed for hardwood floors or follow Bona’s recommendations for compatible cleaning solutions.
- Avoid Excessive Moisture:
- While damp mopping is acceptable, avoid excessive moisture on the gym floor. Water should not be left standing, as it can damage the finish and the wood.
Periodic Maintenance:
- Deep Cleaning:
- Periodically perform a deeper cleaning using a Bona-certified deep cleaning system or a compatible deep cleaning solution recommended by Bona. Follow the manufacturer’s instructions for application.
- Scuff and Stain Removal:
- Promptly clean scuff marks or stains using a Bona-approved cleaner or a solution recommended by Bona. Avoid using abrasive cleaners, as they can damage the finish.
- Reapply Maintenance Coats (if needed):
- Depending on the level of wear and tear, consider applying maintenance coats of Bona Oil-Based Finish as recommended by the manufacturer. This can help refresh the protective layer and maintain the floor’s appearance.
Preventative Measures:
- Use Area Rugs or Mats:
- Place area rugs or mats in high-traffic areas, near entrances, and beneath gym equipment to reduce the risk of scratches and wear.
- Furniture Pads:
- Attach felt or soft rubber pads to the legs of furniture to prevent scratches and dents when moving or rearranging equipment.
- Regular Inspection:
- Regularly inspect the gym floor for any signs of wear, damage, or changes in the finish. Address any issues promptly to prevent further damage.
- Control Humidity Levels:
- Maintain stable humidity levels in the gym to prevent wood expansion or contraction. This is particularly important if the gym floor is exposed to significant changes in humidity.
- Avoid High Heels and Sports Cleats:
- Restrict the use of high-heeled shoes and sports cleats on the gym floor, as these can cause excessive wear and damage to the finish.
Always refer to the specific care and maintenance guidelines provided by Bona for the particular Oil-Based Finish product you’ve used on your gym floor. Following the manufacturer’s recommendations ensures that you are using products and methods that are compatible with the finish, helping to maintain the floor’s beauty and durability over time.
Proper preparation of the gym floor is crucial to ensure the successful application and performance of Bona Oil-Based Finish. Here are general steps for preparing the gym floor, along with considerations for different types of wood commonly used in gym flooring:
General Gym Floor Preparation:
- Clean the Surface:
- Thoroughly clean the gym floor to remove dust, dirt, and any contaminants. Sweeping or vacuuming is usually the first step.
- Repair Imperfections:
- Inspect the floor for any cracks, gaps, or imperfections. Fill these areas with an appropriate wood filler or patching compound and ensure a smooth surface.
- Sand the Floor:
- Sand the entire gym floor to create a smooth, even surface. The level of sanding required may depend on the condition of the existing finish and the specific Bona Oil-Based Finish product being used.
- Remove Sanding Residue:
- After sanding, use a vacuum or damp mop to remove any sanding residue. It’s crucial to start with a clean surface to promote proper adhesion of the oil-based finish.
- Check Moisture Levels:
- Ensure that the moisture content of the wood is within the acceptable range specified by the Bona Oil-Based Finish product. Excessive moisture can affect the performance of the finish.
Considerations for Different Types of Wood:
- Hardwood vs. Softwood:
- Hardwood and softwood may have different porosities and characteristics. Adjust the sanding process and the amount of finish applied based on the specific wood type.
- Maple Flooring:
- Maple is a common wood type used in gym flooring. It’s important to note that maple can be dense and non-porous. Some oil-based finishes are specifically formulated for dense woods, so check the product specifications to ensure compatibility.
- Pine Flooring:
- Pine is a softer wood that may require a different approach. Ensure proper sanding to create a smooth surface, and choose an oil-based finish suitable for softer woods.
- Exotic Woods:
- Exotic woods may have natural oils or resins that can affect adhesion. Clean the surface thoroughly and, if necessary, use a compatible wood cleaner before applying the oil-based finish.
Application Specifics:
- Stir the Finish:
- Before applying the Bona Oil-Based Finish, stir the product thoroughly to ensure an even distribution of solids.
- Apply the Finish:
- Use a high-quality applicator, such as a synthetic brush or applicator pad, to apply the oil-based finish. Work in the direction of the wood grain.
- Allow Drying Time:
- Follow the manufacturer’s guidelines for drying time between coats. Oil-based finishes typically have longer drying times compared to water-based alternatives.
- Apply Additional Coats (if needed):
- Depending on the desired level of protection, apply additional coats following the same process.
Always refer to the specific product’s technical data sheet and application instructions provided by Bona for accurate and detailed information tailored to the oil-based finish you are using. Following these guidelines and considering the wood type will help ensure optimal results and the longevity of the gym floor finish.
As of my last knowledge update in January 2022, I don’t have specific details about Bona Gym Oil-Based Flooring Finishes. However, I can provide general advantages that are commonly associated with high-quality oil-based flooring finishes. Keep in mind that the specific benefits may vary depending on the formulation of the product. Always refer to the product’s technical data sheet and consult with the manufacturer for accurate and up-to-date information. Here are some general advantages:
- Durability:
- Oil-based finishes are known for creating a durable and robust protective layer on gym floors. This helps withstand heavy foot traffic, equipment use, and other stresses common in gym environments.
- Rich Appearance:
- Oil-based finishes often enhance the natural beauty of wood, providing a warm and rich appearance to the gym floor. The finish can deepen the color and highlight the grain patterns.
- Penetrating Formula:
- Oil-based finishes typically penetrate deeper into the wood fibers, providing enhanced protection from within. This can be advantageous for long-term durability.
- Scratch Resistance:
- Oil-based finishes can offer good scratch resistance, helping to maintain the appearance of the gym floor even in high-traffic areas.
- Repairability:
- In the event of localized damage or wear, oil-based finishes can be spot-repaired more easily compared to some other types of finishes. This can be beneficial for maintaining the appearance of the floor over time.
- Moisture Resistance:
- Oil-based finishes can provide a degree of moisture resistance, which is important in environments where spills or moisture exposure may occur.
- Deep Penetration:
- Some oil-based finishes are designed to deeply penetrate the wood, providing additional protection against wear, moisture, and other potential issues.
- UV Protection:
- Certain oil-based finishes may offer UV protection, helping to reduce the impact of sunlight exposure on the gym floor. This can prevent fading and discoloration over time.
- Applicator Friendly:
- Oil-based finishes are often favored by professionals for their application characteristics. They can provide a smooth and even finish when applied properly.
- Versatility:
- Oil-based finishes are typically suitable for various types of wood commonly used in gym flooring, offering versatility in application.
It’s important to note that while oil-based finishes have these advantages, they may also have specific application requirements and considerations. Always follow the manufacturer’s guidelines for proper application, drying times, and maintenance to achieve the best results and maximize the benefits of the chosen Bona Gym Oil-Based Flooring Finish.
In general, two-component flooring finishes, often known as waterborne finishes, can have relatively short drying times compared to traditional solvent-based finishes. However, complete curing, which involves the finish reaching its maximum hardness and durability, may take longer. Here are some general considerations:
- Initial Drying Time:
- The initial drying time for each coat of Bona 2 Component Flooring Finish is typically relatively quick, often within a few hours. However, it’s crucial to follow the manufacturer’s recommendations for drying times between coats.
- Curing Time:
- While the surface may feel dry after the initial drying period, full curing can take several days to a couple of weeks. The curing time can be influenced by factors such as temperature, humidity, and ventilation.
- Precautions During Curing:
- During the curing period, it’s essential to take precautions to avoid damaging the finish. Some general precautions may include:
- Avoid heavy furniture or equipment placement for an extended period.
- Minimize foot traffic, especially heavy or sharp footwear.
- Avoid sliding or dragging objects on the finished surface.
- Keep the floor free from moisture, as excessive moisture can interfere with the curing process.
- During the curing period, it’s essential to take precautions to avoid damaging the finish. Some general precautions may include:
- Ventilation:
- Adequate ventilation is crucial during the application and curing process. Ensure good airflow in the space to facilitate the drying and curing of the finish.
- Follow Manufacturer’s Guidelines:
- Always adhere to the specific guidelines provided by Bona for the 2 Component Flooring Finish you are using. The manufacturer’s recommendations are essential for achieving optimal results.
If there have been updates or changes to the product information since my last update in January 2022, or for the most accurate and specific details, contacting Bona directly or referring to the latest product documentation is recommended.
Recommended Application Method:
- Surface Preparation:
- Ensure that the floor is clean, dry, and free from dust and contaminants. Sand the floor to create a smooth and even surface.
- Mix the Components:
- Bona 2 Component Flooring Finish typically consists of two components that need to be mixed before application. Follow the manufacturer’s instructions for proper mixing ratios.
- Stir Thoroughly:
- Before applying, stir the mixed components thoroughly to ensure an even distribution of solids.
- Application Tools:
- Use high-quality application tools, such as a synthetic brush, applicator pad, or a T-bar applicator, designed for waterborne finishes. Follow the manufacturer’s recommendations for specific tools.
- Application Technique:
- Apply the finish evenly, working in the direction of the wood grain. Avoid puddling or over-application. Some products may recommend a specific application technique, such as a “wet edge” application.
- Drying Time Between Coats:
- Follow the recommended drying time between coats as specified by Bona. This information is crucial to achieve proper adhesion and a smooth finish. Drying times can vary based on environmental conditions.
- Sand between Coats (if necessary):
- Some waterborne finishes may recommend a light sanding between coats to promote adhesion. Check the product specifications for guidance on sanding.
- Number of Coats:
- The number of coats needed can vary based on factors such as the type of wood, desired sheen level, and the specific product. Typically, two to three coats are applied for optimal results, but follow the manufacturer’s recommendations.
- Curing Time:
- Allow the final coat to dry and cure according to the manufacturer’s guidelines before subjecting the floor to regular foot traffic or placing furniture.
Always refer to the specific product’s technical data sheet and application instructions provided by Bona for the most accurate and detailed information tailored to the 2 Component Flooring Finish you are using. Following the manufacturer’s guidelines is crucial to achieving the best results and ensuring the durability of the finished floor.
Properly mixing and preparing the components before applying Bona 2 Component Flooring Finish is crucial for achieving optimal results. Here are general steps for mixing and preparing the components:
Before You Begin:
- Read the Technical Data Sheet: Refer to the technical data sheet provided by Bona for the specific product you are using. This document contains detailed information on mixing ratios, application instructions, and important considerations.
- Gather Equipment:
- Ensure you have the necessary equipment, including a clean mixing container, a mixing paddle, and any other tools recommended by Bona.
Mixing Procedure:
- Component Identification:
- Bona 2 Component Flooring Finish typically consists of two components: a resin (Component A) and a hardener (Component B). Ensure that you have both components and that they are correctly labeled.
- Measure Correct Ratios:
- Accurately measure the required ratios of Component A and Component B. The mixing ratio is usually specified in the technical data sheet. Use a graduated mixing container to ensure precise measurements.
- Pour Component A:
- Pour the measured amount of Component A (resin) into the mixing container. Use a clean container to avoid contamination.
- Add Component B:
- Pour the measured amount of Component B (hardener) into the same mixing container with Component A. Always add the hardener to the resin, following the recommended mixing ratio.
- Mix Thoroughly:
- Use a clean mixing paddle to thoroughly mix Components A and B. Stir the mixture carefully, making sure to scrape the sides and bottom of the container to achieve a homogenous blend.
- Avoid Air Bubbles:
- Mix the components slowly to minimize the introduction of air bubbles into the mixture. Air bubbles can affect the application and appearance of the finish.
- Use Immediately:
- Once mixed, the Bona 2 Component Flooring Finish has a limited pot life, meaning it must be used within a specified time frame. Refer to the technical data sheet for the recommended pot life of the mixture.
Additional Tips:
- If you are working with a large volume of finish, it’s crucial to mix only the amount that can be applied within the specified pot life to avoid waste.
- Follow any additional instructions provided by Bona, such as specific mixing techniques or considerations for the ambient temperature.
Always follow the specific mixing guidelines provided by Bona for the particular 2 Component Flooring Finish you are using. The accuracy of the mixing process is essential to ensure the finish performs as intended and provides the desired results on the gym floor.
he key difference between Bona 2 Component Flooring Finishes and the 1 Component version lies in the formulation and application process. The “2 Component” and “1 Component” designations refer to the number of components or parts that need to be mixed before application.
Bona 2 Component Flooring Finish:
- Two Components:
- This type of finish consists of two separate components: Component A (resin) and Component B (hardener). These components need to be accurately measured and thoroughly mixed before application.
- Mixing:
- Before applying the finish, the two components must be mixed to initiate the curing process. Mixing ensures that the resin and hardener combine to form a durable and protective finish.
- Pot Life:
- Bona 2 Component Flooring Finishes typically have a limited pot life, meaning the mixture needs to be used within a specified timeframe after mixing. This pot life is determined by factors such as the formulation and environmental conditions.
- Curing Process:
- The two components react chemically during the curing process, leading to the formation of a strong and durable finish on the floor. Curing times may vary based on the specific product.
Bona 1 Component Flooring Finish:
- Single Component:
- In contrast, Bona 1 Component Flooring Finish comes pre-mixed and ready for application. It does not require on-site mixing of separate components.
- No Mixing:
- Since it is a single-component finish, there is no need for the end-user to measure or mix separate resin and hardener components. This simplifies the application process.
- Ease of Use:
- Bona 1 Component Flooring Finishes are often considered more user-friendly because they eliminate the need for precise mixing ratios and provide convenience for those who may not have experience with two-component systems.
- Curing Process:
- The curing process for Bona 1 Component Flooring Finish is typically initiated once the finish is applied to the floor. It cures without the need for a separate hardener.
Choosing Between 2 Component and 1 Component:
- Complexity: Two-component finishes are often chosen for their advanced properties and suitability for high-traffic areas. They may be preferred in professional settings where a more complex, durable finish is desired.
- Simplicity: One-component finishes are often chosen for their simplicity and ease of use. They may be suitable for DIY applications or for situations where a quick and straightforward finish is desired.
The choice between Bona 2 Component and 1 Component Flooring Finishes depends on factors such as the desired level of durability, the user’s familiarity with application processes, and the specific requirements of the flooring project. Always refer to the product’s technical data sheet and application instructions for detailed information and suitability for your particular application.
Users may want guidance on how to maintain the appearance and longevity of their floors after applying the finish. This could involve questions about cleaning products that are compatible with Bona 1 Component Flooring Finish, recommended cleaning frequency, and any special care instructions. Additionally, users might inquire about the expected lifespan of the finish and whether it can be reapplied to refresh the surface over time.
The curing time for Bona 1 Component Flooring Finish can vary based on factors such as the specific product formulation, environmental conditions, and the number of coats applied. For accurate and up-to-date information, it’s crucial to refer to the product’s technical data sheet and application instructions provided by Bona. As of my last knowledge update in January 2022, specific details about the curing times for Bona 1 Component Flooring Finish may not be readily available.
In general, here are some guidelines:
- Drying Time:
- The initial drying time for each coat of Bona 1 Component Flooring Finish is typically relatively quick, often within a few hours. However, the surface may feel dry before it is fully cured.
- Curing Time:
- While the surface may be dry to the touch after the initial drying period, full curing—where the finish reaches its maximum hardness and durability—may take longer. Curing times can range from a few days to a couple of weeks.
- Furniture and Foot Traffic:
- The specific recommendations for when furniture can be returned and foot traffic can resume will depend on the curing time specified by Bona for the particular product you are using. Generally, you should wait at least 24 hours before light foot traffic and several days before placing furniture on the finished surface.
- Ventilation:
- Adequate ventilation during and after the application process can help expedite the drying and curing of the finish. Ensure good airflow in the treated area.
- Temperature and Humidity:
- Environmental factors, such as temperature and humidity levels, can influence drying and curing times. Warmer temperatures and lower humidity levels generally promote faster curing.
Always follow the specific guidelines provided by Bona for the particular 1 Component Flooring Finish you are using. The manufacturer’s technical data sheet or application instructions will provide detailed information on drying and curing times, as well as any specific recommendations for optimal results.
For the most accurate and up-to-date information, consider contacting Bona directly or checking the most recent product documentation.
To achieve the best results when applying Bona 1 Component Flooring Finish, it’s essential to follow the recommended application process outlined by the manufacturer. While specific guidelines may vary depending on the particular product formulation, here is a general guide that includes common steps:
Before You Begin:
- Read the Technical Data Sheet: Familiarize yourself with the technical data sheet provided by Bona for the specific 1 Component Flooring Finish you are using. This document contains detailed information on application instructions, drying times, and other essential details.
- Surface Preparation:
- Ensure that the floor is clean, dry, and free from dust, dirt, and contaminants. Sand the floor to create a smooth and even surface. Follow Bona’s guidelines for the appropriate sanding process.
- Room Conditions:
- Maintain room temperature and humidity levels within the recommended range specified by Bona. These conditions can influence the drying and curing times of the finish.
Application Process:
- Stir the Finish:
- Before applying Bona 1 Component Flooring Finish, stir the product thoroughly to ensure an even distribution of solids. Use a stir stick or paddle and avoid excessive agitation to minimize the introduction of air bubbles.
- Application Tools:
- Use high-quality application tools, such as a synthetic brush, applicator pad, or a roller, recommended for waterborne finishes. The choice of tools may depend on the specific product and the size of the application area.
- Apply the Finish:
- Apply Bona 1 Component Flooring Finish evenly, working in the direction of the wood grain. Avoid puddling or over-application. Some products may recommend a specific application technique, such as a “wet edge” application.
- Drying Time Between Coats:
- Follow the recommended drying time specified by Bona before applying additional coats. Drying times can vary based on environmental conditions, so it’s crucial to adhere to the manufacturer’s guidelines.
- Sand Between Coats (if necessary):
- Some waterborne finishes may recommend a light sanding between coats to promote adhesion. Check the product specifications for guidance on sanding between coats.
- Number of Coats:
- Apply the recommended number of coats for the specific Bona 1 Component Flooring Finish you are using. Typically, two or more coats are applied for optimal results.
- Curing Time:
- Allow the final coat to dry and cure according to the manufacturer’s guidelines before subjecting the floor to regular foot traffic or placing furniture.
- Ventilation:
- Ensure good ventilation during and after the application process. Proper airflow helps facilitate the drying and curing of the finish.
Additional Tips:
- Apply finish to the entire length of boards to avoid lap marks.
- Be mindful of room conditions, including temperature and humidity, as they can impact the finish’s performance.
Always refer to the specific product’s technical data sheet and application instructions provided by Bona for the most accurate and detailed information tailored to the 1 Component Flooring Finish you are using. Following the manufacturer’s guidelines is crucial to achieving the best results and ensuring the durability of the finished floor.
roper surface preparation is crucial for achieving optimal results when applying Bona 1 Component Flooring Finish. Here are general steps to prepare the surface before applying the finish:
1. Clean the Surface:
- Ensure that the floor is free from dust, dirt, and contaminants. Sweep or vacuum the surface thoroughly to remove any loose particles. A clean surface is essential for proper adhesion of the finish.
2. Sand the Surface:
- Sanding is a critical step to create a smooth and even surface for the finish. Follow these guidelines:
- Use the Right Grit:
- Start with a coarse-grit sandpaper and progress to finer grits to achieve a smooth finish. The specific grits may vary depending on the condition of the existing floor finish.
- Address Imperfections:
- Sand out any imperfections, scratches, or uneven areas. Pay attention to high-traffic zones and areas with visible wear.
- Edge Sanding:
- Use an edger or hand sanding tools to sand along the edges of the room and in corners, where larger sanding equipment may not reach.
- Vacuum or Tack Cloth:
- After sanding, thoroughly vacuum the floor to remove sanding dust. Alternatively, use a tack cloth to wipe the surface and ensure it is free from residual dust.
3. Repair and Patch:
- Inspect the floor for any cracks, gaps, or imperfections. Fill these areas with an appropriate wood filler or patching compound. Follow the manufacturer’s recommendations for the specific product you are using.
4. Check Moisture Levels:
- Verify that the moisture content of the wood is within the acceptable range specified by Bona for the 1 Component Flooring Finish. Excessive moisture can affect the performance of the finish.
5. Ensure Proper Ventilation:
- Adequate ventilation is essential during the application and drying process. Ensure that the room is well-ventilated to facilitate the drying of the finish.
6. Follow Bona’s Guidelines:
- Always refer to the product’s technical data sheet and application instructions provided by Bona. These documents contain specific recommendations for surface preparation based on the particular 1 Component Flooring Finish you are using.
7. Conduct a Test Patch:
- Before applying the finish to the entire floor, consider doing a test patch in a discreet area. This allows you to assess how the finish interacts with the wood and ensures compatibility with the existing floor.
8. Mask and Protect:
- Use painter’s tape to mask off areas where you don’t want the finish to be applied, such as baseboards or adjacent rooms. Additionally, take measures to protect adjacent surfaces and furnishings from any potential splatter during the application.
Always follow the specific guidelines provided by Bona for the particular 1 Component Flooring Finish you are using. Adhering to the manufacturer’s recommendations for surface preparation is essential to ensure proper adhesion, durability, and the overall success of the finishing project.
The only main difference is that the multiair cyclonic Norton Blaze discs are meant for orbital-type machines that have a vacuum. The many holes ensure that the disc will work on any machine with a vacuum,
Absolutely, the Norton Blaze discs last long on any type of machine whether that be a multihead, powerdrive or an orbital. The blaze has a thick, tough backing to withstand the heat generated from long-use times.
Norton Blaze Discs are a great choice for a disc because they last long, have a good paper backing, and get the job done with fewer scratches. Unlike other sandpapers that last long, these leave less scratches for an easier time orbiting.
Since this product is a very low sheen – it is extremely easy to use. We recommend just like Loba a t-bar or roller.
Ideally you will want at least 3 coats. We find that the recommend 2+ coats is not enough of a base and will show premature wear.
Honestly, you might think your contractor didn’t even apply finish on the floor. This finish is ultra matte. Awesome for getting a very organic wood color.
Solid hardwood flooring is a popular choice for homeowners due to its natural beauty and durability. However, like any flooring material, it can also have some typical problems that may arise. Here are a few examples:
- Moisture damage: Solid hardwood flooring is vulnerable to moisture damage, which can cause warping, cupping, or buckling. This can occur from spills, leaks, or even high levels of humidity in the home.
- Scratches and dents: Solid hardwood flooring can be susceptible to scratches and dents from heavy furniture, pets, or dropped objects. These can be more noticeable than in other flooring types due to the natural appearance of the wood.
While engineered hardwood flooring offers several advantages, such as greater stability and resistance to moisture, it also has some typical problems that may arise. Here are a few examples:
- Scratches: The top layer of engineered hardwood flooring is usually made of a thin veneer of real wood, which can be easily scratched or dented by heavy furniture or pets.
- Delamination: If the adhesive used to bind the layers of the engineered hardwood flooring fails, the planks can begin to separate or delaminate.
- Moisture Damage: Although engineered hardwood flooring is more resistant to moisture than solid hardwood flooring, excessive moisture exposure can still cause warping, cupping, or buckling.
- Limited Sanding: The thin veneer layer of engineered hardwood flooring means that there is a limited amount of wood that can be sanded down over time. This can make it challenging to refinish the floor if it becomes worn or damaged.
- Poor Quality: Not all engineered hardwood flooring is created equal. Some manufacturers use low-quality materials or production methods that can lead to issues such as warping, splitting, or shrinking.
- Checking – Engineered hardwood checking refers to the appearance of small cracks or splits that can develop in the top layer of the flooring. These cracks can occur along the grain of the wood and can vary in size and frequency.
It’s important to note that these problems are not universal and can be avoided with proper installation, maintenance, and care. Choosing high-quality engineered hardwood flooring and having it installed by a professional can also help to minimize the likelihood of these issues.
Solid hardwood has a smaller footprint in the gas, electricity, and consumables used in production.
Solid hardwood has the most usable wear layer of an engineered wood. Even full 6mm wear layers still have a little less meat on the vanner compared to solid hardwood. Solid hardwood can last centuries. The glue in engineered hardwood is only rated for 25 years.
Typically engineered hardwood is slightly more stable. However, with a bad climate, all wood will move or shrink. While more stable, engineered hardwood has wood going in different directions per layer which can cause other issues if there is a climate change in the home.
While it is true that engineered flooring can have issues with delamination or the veneer layer coming off, this is generally not a common occurrence with high-quality engineered products from reputable manufacturers. Additionally, the adhesive used in the production of engineered flooring is designed to withstand the stresses of everyday use and is typically very durable. Solid flooring, on the other hand, can also experience issues such as cupping, warping, or cracking due to changes in humidity and temperature. Both types of flooring have their own potential problems, and it is important to choose a high-quality product from a reputable manufacturer and to properly maintain and care for your floors to avoid issues. Even with a reputable company – you will have issues from time to time.
It is true that the production process for engineered hardwood flooring involves more steps and materials than solid prefinished or unfinished flooring. The logs used for engineered flooring are typically shipped overseas to Asian countries, where they are processed into the multiple layers that make up the core of the flooring. This process requires a significant amount of glue and other materials that are not used in solid flooring. The finished flooring is then wrapped in plastic, boxed, and shipped back overseas on a boat to be distributed to stores in the United States. This transportation process also has an environmental impact due to the emissions produced by transportation vehicles.
It is true that the colors of engineered hardwood flooring may not last as long as those of solid hardwood flooring. They can fade or change within 2-3 years, and the color can also vary between different production runs, making it challenging to match during an add-on project. To ensure a consistent look, it is recommended to purchase extra flooring during the initial installation or to purchase all the necessary flooring for an add-on project at the same time. This can help to avoid frustration and ensure a seamless match.
While it is generally easy to match the color of solid prefinished hardwood flooring with stains, the presence of bevels can create an issue for matching later on. Colors can go in and out of style, and become difficult to find years later, making it challenging to match the color of beveled flooring during an add-on project. On the other hand, solid prefinished flooring is less likely to go out of production, making it easier to find and match if an add-on project is needed in the future. However, it’s always a good idea to keep extra planks from the original installation to ensure a seamless match if an add-on is required.
Compared to other types of flooring, solid prefinished hardwood flooring does use more resources, energy, and packaging to manufacture. While it may not be as detrimental to the environment as some types of engineered hardwood flooring, there is still an impact to consider. However, it’s worth noting that solid prefinished hardwood flooring is a long-lasting and durable flooring option, which can make it a more environmentally friendly choice over time, as it will not need to be replaced as frequently as other types of flooring. Additionally, choosing sustainably sourced wood and eco-friendly finishes can further reduce the environmental impact of this type of flooring.
The bevels in engineered hardwood flooring can limit the number of times the flooring can be sanded, which can be considered a disadvantage compared to solid prefinished hardwood flooring. Generally, you may lose one or two sandings on engineered hardwood flooring due to the presence of bevels, compared to solid prefinished flooring. Therefore, if you anticipate needing to refinish your floors several times over their lifespan, solid prefinished hardwood flooring may be a better option for you.
It is not possible to install an unfinished hardwood floor today, as it requires a finishing process that typically takes about a week to complete. In comparison, prefinished solid hardwood flooring can be installed more quickly, typically taking around three days. Therefore, choosing prefinished solid hardwood can speed up the installation timeline compared to unfinished hardwood flooring.
Cracks are an inevitable aspect of any wood-based flooring, regardless of the type. Engineered hardwood flooring may have fewer cracks than other types, but it can still move over time. The reason why cracks are less noticeable in engineered flooring is due to the presence of bevels. On the other hand, solid unfinished hardwood flooring may show more cracks, even if it is the same as engineered flooring. In some cases, the way the wood is cut can affect the amount of cracking due to moisture. While this can be a disadvantage, it is not a cause for concern if you take proper care of the humidity and temperature levels in your home. All types of flooring can move if they are not properly maintained.
Engineered hardwood flooring is often available in wider planks than solid or prefinished hardwood flooring, as it is made by peeling wood and then layering it together. This method allows for wider planks to be produced in larger quantities compared to solid or prefinished hardwood flooring. Typically, engineered hardwood planks range from 5 to 10 inches in width, but wider options may also be available depending on the manufacturer.
Engineered hardwood flooring offers an extensive palette of colors to choose from, providing a vast array of options for those seeking a very specific color or style. With the availability of such a broad range of colors, you can rest assured that your specific color needs can be met and that the product is ready to be installed.
Prefinished solid hardwood flooring offers a wide range of color and sample options, allowing you to see the finished product on a larger scale before starting the project. This provides a reliable way to visualize the final look of your floor and make an informed decision about the color and style that best suits your needs and preferences.
Prefinished solid hardwood flooring is ready to be installed right after an acclimation period. The wood is stained, textured, and finished at the factory, so there is no need to go through the process of staining, texturing, or finishing it on-site after securing it with staples or cleat fasteners.
Prefinished products may become discontinued if they do not sell well, but solid hardwood flooring will never be discontinued because the raw material – the wood – is grown on trees and can always be harvested. This means that if you have a hickory floor installed today, you can always add onto it or match it in 30 years’ time.
Solid hardwood flooring that is site-finished typically has square edges without any bevels. Beveled edges can collect dust and dirt, leaving remnants in the cracks, whereas solid flooring is easier to clean and maintain since it has no inherent cracks.
Solid flooring is essentially the same as other types of flooring, except that it is finished on site. However, solid unfinished hardwood flooring offers the same variety of options that you would find in any store in the Boise or Spokane area. It can be stained in any color, wire-brushed or hand-scraped, and finished with any level of gloss.
Solid unfinished flooring is actually the most environmentally friendly flooring option available today, despite what the marketing industry may lead you to believe.
It is ideal to go the long way or “with the grain” of the flooring. You are less likely to see streaks or unclean areas you did not get 100% clean.
You will notice the cleaning mop head gets dirty after about 100-200 sq ft in your home. It is ideal to wash it out in the sink and then begin again.
The mop should be damp. The key to cleaning hardwood flooring with a cleaning mop is to vacuum first. By vacuuming first you get a majority f the dust off the floor so you do not create mud.
No, since the floor is 3/4″ thick the fasteners such as cleats or staples seat better and typically do not go through the flooring and let the floor move to create a noise.
We recommend gluing 4″ and higher for wood flooring. When we recommend gluing we recommend glue assist which uses adhesive sausage in a “S” pattern.
No, it is the same as unfinished hardwood. It is better than engineered hardwood as the wear layer is thicker and this naturally means the floor will last longer. However, if you are not a professional installing prefinished flooring, prefinished flooring is better than unfinished as unfinished requires very niche tools to make the jobs perfect and not sub-par.
Solid prefinished flooring is just that solid hardwood flooring that is prefinished at the factory. Virtually the only downside to this method is that the boards usually have a slight bevel on the edges so that there are no issues while installing the boards.
Absolutely, unfinished hardwood flooring can be stained any color. Depending on the wood species will have an effect on the outcome color of what is being applied. You are also able to apply different textures to floors to make them look different.
Solid unfinished simply does not have a finish on it yet. Solid Prefinished flooring is unfinished flooring with a factory stain and finishes on it. Generally, these types of flooring are in the same category.
Well, you should hire a professional hardwood flooring installer/refinisher. Basically, you sand a floor with different machines, then put sealer on, and then the final finish coats on.
It won’t do anything but the wood will be unprotected. Some racquetball courts are unfinished but drinks and such are not allowed near them as it will cause issues. If you leave the wood unfinished it will ultimately become grey or black in color.
All floors are priced relative to the product quality. Cheaper wood like engineered 3/8″ vs 3/4″ flooring will be cheaper. generally, everything that Rustic Wood Floor Supply sells is priced the same across all sections of flooring based on quality. We have some prefinished items much more expensive than unfinished wood and some are more expensive. When you price the higher quality engineered woods against solid unfinished hardwood, unfinished is generally cheaper up front and in the long run.
Yes and no. Engineered hardwood is wood, so, it is as durable as solid hardwood. However, you are unlikely to be able to refinish it so you need to be sure to maintain the floor and buff & coat if possible every few years to ensure your investment lasts a long time.
While there are disadvantages to engineered flooring, there are advantages as well.
- Colors – You will notice that engineered flooring has more color options than maybe you are used to. Not that site finish on solid hardwood flooring you can’t get these colors – it is usually hard and can be time-consuming. Most engineered flooring has multi-layered colors that are not easily reproducible with stains.
- No sanding – While sanding does take an extra day or 2 engineered flooring allows for anyone to install and be done after installation
- Cheaper price points – While cheaper isn’t always better, not everyone has money for solid hardwood. However, cheaper usually has more issues so be careful which cheap option you choose.
Coming from an industry professional, below are real disadvantages of engineered hardwood flooring that traditional flooring stores will not tell you or warn you about prior to buying flooring. Remember, we sell every flooring – we just make sure to fully educate our client’s customers to the fullest for the most informed decision before spending thousands to only find out the choice was wrong for them.
- Unable to refinish – most engineered flooring has small wear layers, hand scraping, or something else that does not allow for resanding. ONLY 4mm with no distressing can really be truly refinished 1-2 times.
- Delamination – these products use many layers of wood to create their product. You need to understand this is not one solid piece of wood and glue can and will fail.
- Different cuts expand and contract differently – Different manufacturers to get certain price points will use cheap wood that produces issues when it gets cold or heats up.
- More noise – You are putting many layers down that are thin. The nail that goes through these materials usually does not set correctly, why we recommend a glue assist. These nails will produce noise if not set correctly. Pops are within spec.
I mean, this one is impossible to truly answer. However, Ideally, even if you do not believe it solid hardwood is probably better overall. That does not mean that engineered flooring is not ideal for certain applications or homes. Solid hardwood is longer lasting since you are able to refinish it. Engineered is possibly better for you if you desire a very specific color, the flooring is going below grade and your timeline is very slim.
Engineered hardwood typically lasts between 20 and 30 years.
Because they do have a top layer of hardwood, like solid hardwood, they are susceptible to scratches.
If scratch resistance is important to you, look for engineered hardwood floors with a scratch-resistant top coat. Small scratches on engineered hardwood can be repaired a wax repair kit or a cotton cloth and some rubbing alcohol.
Since the popularity of engineered hardwood has grown, solid hardwood is generally on par with most higher end engineered floors. Cheaper floors like 3/8″ flooring will still be cheaper.
While engineered hardwood may look similar to laminate flooring, they are not the same.
Engineered hardwood contains a top layer of solid wood, while laminate flooring has a photographic layer coated with a wear-layer that appears to look like a wood surface.
In addition, laminate flooring is usually thinner than engineered hardwood.
This question really depends on a lot of factors. First and foremost, if you have mapjor water damage the floor is ruined. Usually engineered floors are unable to be sanded since ther eis distressing, bevels and other things making sanding impossible. If you have no major damage a floor should last 20-30 years if maintained and you buff and coat the floor. A solid hardwood floor will last much longer.
Engineered flooring is typically between 3/8” to 3/4” thick, whereas solid hardwood is 1/2” to 3/4“ thick.
When compared to other flooring options, engineered hardwood floors offer the following advantages:
- Affordability: Engineered hardwood flooring falls on the lower end of the wood flooring price scale, typically ranging from $4–$10 per square foot depending on thickness and species.
- Moisture-resistant: Although standard engineered hardwood isn’t waterproof, it does boast excellent water resistance, making it a better choice for moist environments such as kitchens and bathrooms.
- Easy to maintain: Engineered wood floors simply need regular sweeping or gentle vacuuming to maintain, and may occasionally be mopped with a wet mop and neutral cleaner to restore shine to their surface.
- Quick installation: The click-and-lock system offered by engineered wood flooring allows for a quick and easy installation.
Engineered hardwood flooring looks almost identical to solid wood, but the way it is manufactured offers premium durability at an affordable price. Instead of a single wood plank, engineered wood flooring is made of a high-quality plywood core with a thinner layer of wood on top. This allows engineered hardwood to display the beauty of its species while leveraging the cost-effectiveness and added strength brought by its design.
Whether engineered or solid hardwood flooring is the better option for your home is dependent upon several factors. Engineered hardwood flooring is better for moist environments than solid hardwood, making it the best option for kitchens, bathrooms, mudrooms, and basements. Because of engineered hardwood’s improved water resistance, it also offers simpler maintenance than solid wood flooring, as you can use a wet mop to clean its surface. However, engineered hardwood floors cannot be restained over time, meaning solid wood has a longer lifespan. That being said, engineered hardwood is best suited for homes where durability is of primary concern, such as those with small children and animals, or in high-traffic areas such as kitchens or basements.
Full repair, free of charge. 3-Year Comprehensive Warranty Coverage – including wear and tear! Fast, thorough and free for the first three years. Festool aclso guarantees parts for atleast 10 years after the last tool is sold of a certain itteration.
Yes, the tools come in corded and battery options. You will notice that the battery operated tools actually offer a stronger motor.
Absolutely, Festool is a highend brand tha toffers great tools and an amazing warranty. If you are looking for professional tools, Festool is a great option.
Urbanfloor engineered wood floors can be installed on above, at or below grade and only require sensible precautions. Moisture can be a problem below grade even when no moisture exists at the time of installation. A vapor barrier, sleeper system or both should be used for nailing down and a two-part urethane adhesive should be used for gluing down.
Absolutely. Hardwood floors are convenient to maintain and clean, making it easier to avoid the dust build-up that often occurs with carpets. Cleaning up pet hair and spills is also more convenient with hardwood floors.
The Urbanfloor PLATINUM SHIELD™ UV finish features seven coats applied with extreme accuracy and toughened by the millions of Aluminum Oxide Crystals to ensure a smooth, uniform finish with unparalleled abrasion-resistance and beauty. Find out more at our structure and quality page.
It can be confusing what is and isnt affected by heat. Any easy way to know is if the title has SPC in it. SPC is unaffected by the sun up to 240 degrees. Ridgid core and luxury vinyl without the SPC core is affected at around 95 degrees.
Yes, our 20mil product is meant for commerical spaces. You are able to use the 12mil in light comerical areas as well with certainty it will last.
Yes, our luxury vinyl spc flooring options all have the pad attached. You do not need to put extra padding down.
The main spec for all luxury vinyl is the stone content. The stone content makes it so the product is stable. A low ston content (less than 69%) will move in heat through a window.
We would recommend asking to have one of our experts come out to figure out why the wood is moving to mitigate the issue. Usually slight movement is normal through the seasons. Y ou are able to stop all movement by keeping the RH and moisture the same throughout the year.
The NWFA requires the use of staples or cleats and for solid hardwood flooring planks wider than 4″ to be glued as well. While gluing is recommended there are 2 options, full spread or glue assist. We find that glue assist is the ideal way to fasten 4″+ wide boards down.
Splid hardwood is usually 3/4″ thick. The flooring also has a tounge and groove to lock the flooring in.
Yes, they will be flush to the ground and not have a lip. Self rim vents are not ideal since they will catch on things and collect dirt.
Yes, our wood and metal flooring vents need to be installed when the floor is being installed or routered in after. Installation of the flooring vents listed are easy, if you have some expereince with a track saw, fein multitool or table saw.
Absolutely, all our vents we sell come with a waranty. If your vent breaks you are able to bring it in for a replacement. Our flooring vents are made to withhold 900lbs or so.
Norton blaze is for ripping finish off and getting hte floro flat. Red heat is good for refinishes that are pretty flat already and for final sanding. THAT DOES NOT MEAN red heat cannot be used for intial cuts, orange blaze just lasts longer and is sharper. However, the blaze mineral is not the best for final sanding on a belt. The scratches are deeper.
Each manufacturer of sandpaper has different levels of sandpaper. The highest current grain is full ceramic. The full ceramic lasts longer, does NOT create bad scratches and is decent pricing. Overall you will find that 3M will last long and works well, but does not excel at any given thing. Norton paper is made in different types and the different types work great fo different senarios and produce less scratches.
You will need to use a mixing filler or a wood doe and mix it with dust. You mix these fillers with the wood dust from the floor and it will match exactly.
Yes, All fillers we sell accept stain from Duraseal. You will have no issues with staining a floor while using the fillers we sell.
Absolutely, all filler options are generally dried between 20-40 min.
Every house’s power grid is different and can cause issues for any flooring machine. It is ideal wto use a power booster to ensure your machines power is consistent.
Usually it seems like your finish scratches, most likely it is the flooring that “dents”. Finish is malleable and will move with the dent so it appears the finish dented, but it really is the flooring under the finish.
NO finish, material or flooring product will repel water forever. All finishes are meant to let the products breath to a certain extent. Oil repels water, but if the product moves at all (which it will) you will have a crack where water can penetrate. LVP and engineered wood have the same issues as both products can move due to enviormental changes. That includes waterproof flooring!
All the finishes are pretty comparable between the different categopries, waterbased, penetrating, swedish etc. The main difference is the color/look of the floor after.
Hardowoood flooring equipment and machines are not regularly updated as they have stood the test of time and work great as is. These machines are rugged, can sand a floor flat and generally have everything you would want or need to get a job done correctly.
No, just because it is easier to spread does not mean it is less sticky. The beauty of a Silane based glue for flooring is that is moves with the wood and is extremely sticky without ruining the wood flooring if it touches it.
Yes, the Silane glues we sell work for all the products that we sell.
Different glues allow for different widths. It is recommended to check the label and buy accordingly. Each of our glues has the width rating listed on their respective pages. Some of the glues allow unlimited width.
It is recommended to clean the glue droppings/mess up within 45 min as it is not skinned over yeat and has yet to bond to anything. The easiest way to do this is with a damp cloth.
Silane glue is a very popular hardwood flooring glue that is considered “new” generation of glues. These glues offer no need to mix, dry fast and have awesome elasticity. Typically these glues have a skin time of 4-60 min and a full cure time of 18-24 hours. We recommend Silane glues from pallmann and loba as they work well in our climate to allow movement without sheering the glue to board bond.
This is impossible to say as there is a hundred different ways to use a disc. What I can say is that it lasts about the same as 3m regalite and bona blue but leaves a better scratch for your next pass. This is important if staining.
Ceramic. Not mixed ceramic or wanna be ceramic but full, reall ceramic grain.
The Norton Red Heat sanding discs are awesome at leaving a smaller and consistent scratch than other brands as this is a full ceramic. The full ceramic breaks down slower, is not as wild with the scratches and generally leaves a much better sanding surface for the next grit to take away the heavier scratche sin the low grits.
Mesh power typically lasts 500-900 sq ft. BUt is highly variable on the grit being used. 220g Norton mesh power will last longer than 80g.
Just like normal sandpaper really. The only other difference is you need to use the interface pads to give this sandpaper better support.
Norton mesh lasts very long, does not gum up and is great and leaving no scratches. This product can be usxed from final sanding to intercoat abrasion. These demolish the bona diamond discs in use and price.
Well, this depends on a lot of factors such as hat grit you are using etc. However the lower grits tend to get 1000 saq ft. while the higher girts seem to get 2000-4000 sq ft a cut piece. (duel sanders with a rider)
We encourage people to use blaze for the lower grits and then red heat for the higher grits. However, the price difference is very minimal so blaze might be the best option. Blaze on lower grits cuts harder and longer than red heat. On higher grits, red heat products a better scratch – however, in a gym this might not matter too much.
Yes, both the norton red heat and the blaze gym floor sanding rolls work great. Both options have great cloth backing to ensure long lasting sandpaper. The backing on these rolls is far superior to other brands.
Think of orange blaze as specifically for ripping stuff off the wood or flattening wood quickly. Red heat generally does not do as much “work” to the finish or wood but produces less scratches on the floor. Red heat is a overall good belt that works for every application – orange blaze is not meant for final sanding.
Depends what you are talking about. However, if you are looking for the best scratch on a floor – Norton offers the best pure ceramic on the market. Most companies grain is inconsistent and leaves random scratches as the grains are all different sizes.
The cloth backing is thick and holds together well. The belt sandpaper will wear faster than the belt cloth backing. The good thing with a thickbacking is it ensures your tracking is good throughout the whole sanding process.
Absolutely, these belts are premium belts with thick backing. If you are having any tracking issues, check out your upper roller.
To not have denting on the super soft wheels you will need to upgrade to polyurethane wheels. These wheels put less pressure on the wood and will not dent.
The Super 7R edger is not as easy to adjust compared to a flip or gecko. However, once you know how to adjust it – is not super hard to do.
The Super 7R is tried and tested. If you want something that can rip finish off the floor and hone wood down to flat, fast – the American Sanders Super 7R is your best bet. This edger is a staple for gym floor contractors for decades!
There is a RS-16 and RS-16DC. Rustic only sells the American Sanders rs-16DC since dust containment is very important. so DC stands for dust containment.
While this machine is less befy and agresive than the 1600DC, it is great for buffing on the final pass with a screen or mesh power. It is also great for intercoat abrasion as it is light and easy to move into the house. Another reaon this machine is good for intercoat abrasion is it is lighter so it will not cut through too much finish or buff off stain.
Yes, this machine is one of the more agressive machines on the market. This thing loves to eat wood for breakfast. The pressure on the head is higher than a lagler.
Besides the wheel base which takes a lot of abuse, the machine is very durable and long lasting.
Yes, the multihead type tools work perfectly fine with a 1600dc.
While warranty work is not normal, American Sanders has a b ig network of approved repair shops. This makes it very easy to get your American Sanders 1600dc fixed fast!
Absolutely, while this is a 110v buffer and you might think it is not as strong as a power drive or spider – this thing does it all. The American Snaders 1600DC is strong, durable and ready for any flooring application you might throw at it.
Since there is a wide range of grits and applications this is an impossible question to answer.
The higher grits are great for intercoat abrasion. The mineral used for this is very fine and tight, meaning it leaves less noticable scratches.
These discs are able to be used after you use the big machine or have the finish off the floor. The 3M Easy Change discs are a finer sanding paper for more finish sanding.
Generally depends on grain raise. If you are buffing an oil or a normal unpigamented sealer it might be best to buff with 150g-220g. Pigamented sealers like whiteseal, nordic etc will most likely want to be buffed lightly if at all and a spp or maroon pad is great for that.
yes, one is slightly more rough than the other. However, after a few seconds of buffing they are generally about the same.
Usually used to buff waterbased finishes or as an intermediatry for a screen, easy change disc or something like this.
No, overtime it will do damage to the finsh and make it duller.
Depends on how dirty the floor is and how fast you are moving. In a house 1 should do 500-1000 sq. In a gym you will either get 1500-2000ft or as little as 500 if the floor is dirty or has lots of sticky gum type substances.
Yes, they are pretty harmless on floors unless you sit in one spot for a whilte. These pads are able to help agitate cleaner or depolishers into the affected surface. They also pickup some debris as you buff, so be careful if the floor is very dirty as this debris can scratch the floor.
Since these pads are able to be used on so many different applications this question is impossible to answer.
This pad can be a intermediate pad for screens or Easy Change Discs as well as used for buffing on stain, taking off wax oils and such.
Really depends on what you are doing but for best practice follow the instructions of the finish being applied. If still unsure these should work.
- Waterbased: 180g-220g
- Oil-based: 150g-180g
- Swedish: used 220
While highly dependant on what you are sanding. On raw freshly sanded wood you shoudl get 150-300 sq ft out of a screen. You are able to flip it and get some more usage. But, be careful as you might be too dull and poilishing the floor or getting a different look when finishing the floor.
3M sanding screens are made out of silicone carbide. This mineral is not as good as others but produce a good result as the mineral is dull at the tip and when breaking down doesnt make the mineral sharper.
Either you are overusing the paper and need to change it out or you are using too fine of a grit for the application.
Yes, 3M produces a quality product that really stands up to the abuse. The biggest mistake some flooring contractors make is overusing the disc and heating it up, thus, sticking to the machine or velcro.
Yes, the backing is thick and appropriate for each application. The Regalite mix of grain is good for all phases of sanding. Please note that Regalite is not the best mineral for final sanding as the mineral is different in size because it is a mixture of minerals.
On a normal floor 300-500 ft is a good guidance. Every floor is different remember – a cherry floor might get more use because it is soft or a brazillian cherry floor might just get less usage. Also, higher grits probably get an extra 100-200 sq ft of good usage.
No, not really it is black and made of what looks like rocks. It is not apart of the Regalite family.
Still a contractor favorite on the west coast, who doesn’t love purple? Anyways, these belts are constructed in an overbuilt way. The backing is thick and unless absolutely hammered do not rip or break. The grain is strong and long lasting, it is predictable on each and every job.
Yes, Pallmann is able to facilitate that for your first job using Pallmann. Give us a call.
Absolutely, give us a call and we can set this up for you.
If you are looking for help you can go to – https://us.pallmann.net/ or call them at this number 866.505.4810.
Pallmann the company is based out of Denver for their USA distribution. The company itself is founded in Germany.
Typically when you think of Pallmann wood flooring products you think of ease of use. The Pallmann brand of products tend to be the easiest to use in their respective categories. You will not find another company that has the same lineup with the ease of use for their products.
Absolutely. The Pallmann Spider is likely around 98% dust free with a good vacuum. We advise to use a dust seperator as there is a lot of dust produced.
The Spider uses 220v Power. This power gives it the power to be able to sand the flattest floors.
The machine uses 3 heads which create 3 different scratches going that overlap at once. The Spider is unlike a traditional buffer that makes a full circle pass on the same scratch plane. With a spider you will never get a circular scratch pattern. Another reason is the Pallmann Spider RPM adjustment allows for a much faster spinning head creating millions of smaller scratch undetectable to the eye.
The Pallmann Spider uses 7″ hook and loop. We recommend Norton Red Heat & the Mesh Power as it performs the best.
No, the wood might change from sun damage but Pall-X Power will not amber signifigantly or noticably like an oil or swedish finish.
Absolutely, this is a new gen finish that requires no mixing of a hardener so it can be used on different jobs.
Honestly, any normal method is a good way to apply Pall-X Power. We recommend a t-bar or roller but a pad or brush will work as well.
Pallmann Pall-X Power might just be the easiest finish to apply. Easier than Loba and Bona by far. For Pallmann ease of use is very important. The easiest products to use make sure contractors get paid and customers are happy with the look.
The bill allows you to change out the head if needed but also cuts down on scraping under the cabinets. Also, the bill allows for better sanding pressure and control of the scratch pattern.
Hook and loop 7″ sandpaper is needed to use the Pallmann Gecko 2.0.
You just adjust the yellow knobs up or down to get more agressive sanding or lighter more orbital sander like sanding. This machine is very versatile.
While the edger obviously looks different than a nromal Super 7, it is easier to use and sands better than a traditional edger. It will probably take 5-10 min to get use to the edger and be ready for anything you might encounter while sanding.
No, pallmann does not advise to do 2 coats of sealer as it is not meant to stick together.
Yes, there is no mixing so Pall-X Color sealer can be used on multple jobs with no issues.
The Pallmann Pall-X Color sealer makes the floor look close to a neutral stained floor. It gives great depth and makes natural and stained floors pop.
Pall-X Color is super easy to use and can be applyied with any method you would like such as roller, t-bar, bursh or pad.
Since the Pall-X WhiteSeal has white pigament in it, if you apply the finish too thick it will become whiter in areas. Going super thin gets rid of this issue.
Yes, Pallmann Pall-X WhiteSeal makes the floor look whitewashed or a Nordic look.
It is not as easy as color or clear to apply. However, if you do 2 thin coats with a roller and are conscious about the edges you will find you have no problems.
Your customer might just ask if you coated the floor. This finish makes it look like nothing is there compared to normal finish.
After mixing we recommend to keep mixing it as you go and to use this finish within 1 hour of mixing. To get the no sheen affect, pot life is affected.
Pallmann clearly states to only use a roller with this product. Thin and multiple coats is best.
We find that you can not get the sealer thin enough without the proper roller. A t0bar will leave start and stop marks as it is very hard to get it perfect film thickness.
Raw unsanded wood is what the look of Pall-X NatureSeal produces.
Yes, Pall-X NatureSeal is harder to apply than say a Pallmann Color and Clear sealer. After using the normal sealers you are spoiled as the pigamented sealers are harder to use since a heavy spot will appear whiter.
Using a Pallmann roller is the proper way. You also need to do 2 coats. Make sure each coat is thin. Then apply 2-3 top coats after.
No, this is a 2 component finish that will harden or begin hardening (depending on climate) after 4 hours or so. After use you can use it for a 2nd coat but after that it will not work.
Suprisingly for a 2 componenet finish, Pall-X Gold might just be the easiest to apply to flooring. In fact it works great on all species.
Absolutely, it is a 2 component finish that dries fast and is extremely durable. Pallmann Pall-X Gold finish is commercial rated.
I would say a natural look, so a normal waterbased sealer look. It does not bring out a lot of color and keeps the wood a more neutral look. If you want more depth or color and not a natural look, use the Pallmann Pall-X Color.
No, you need to use Pallmann Pall-X Color on walnut and birch woods. Clear will leave line son those woods because of the chemicals in the wood will react.
Everyone says it, but seriously you can use any method with this sealer. It is so nice using great products that work for you. You can use roller, t-bar, pad or brush.
Why fight to make a job perfect when you can use a product that makes your job perfect. Seriously, Pallmann Pall-X Clear/Color are the easiest of sealers to use. This is coming from 4 years of personal expereince trying different sealers.
No, Pallmann does not believe in intergrated moisture barrier as it doesn’t always work as intended and causes many issues with other brands moisture control that is impregnated into the glue itself.
P7 adhesive is able to be used on any width plank flooring that is 3/4″ and down.
Simple, b11 is the trowel to use for p5 and p7 glue.
Yes, P7 adhesive does spread easily. In fact, you are able to pour this glue out of the bucket – its that easy to spread.
No you do not need to us ea primer. It is ideal to use the Turbo 104 as a moisture mitigation of the subfloor.
Pallmann holds themselves to a higher standard so they do not offer the bait and switch of the moisture barrier. They offer a moisture barrier roll on that they feel is up to standard and will cover contractors. The main issue Pallmann says is wrong with the moisture barrier glue is that it is impossible to get a perfect spread unless you butter each board.
Yes, this glue is modified silane based and is a new generation of glues.
Yes, this might be one of the easiest glues to cleanup. If droppe don finish, will not etch the finish.
This knob makes it so you have a wide range of drum pressure from a lot to a little. The setting is a dail so you have a lot more options vs other machines.
Yes, it is basically like anyother drum sander. There isn’t very many part sso maintenance isn’t the most difficult.
Like all pallmann machines, this machine is overbuilt and is rugged.
Yes, the MS 262 works great for both applications. We advise to still nail with glue assisting.
One tube does 9sq ft. but since you are probably doing lines or s pattern application you should get 30-60 sq ft.
Just get a microfiber towel and clean it up or use Loba clean towels. It is ideal to clean before it dries. Once dried it can be harder to clean up.
You put the sausge in the tub and then once in take dike cutters and snip right below the metal tag. Once cut you put the top on and you are off to the races.
You need moisture transfer on wood substrate so it does not mold. Therefore, you are only able to only do 1 coat or it would build too much moisture.
Wakol PU 280 is approved to work with c oncrete and wood substrate (like plyuwood or osb)
You should be using use Loba microfiber roller # 60–80 or # 120. Make sure everything is blue, if not blue moisture will come through.
Yes, you can put it on a damp subfloor as long as it does not have standing water. Highly suggest to figure out if the water issue is fixed or not. PU 280 blocks moisture but it doesn’t block standing water.
Yes, it does offer sound dampening. STC (ASTM E 90) up to 67 & IIC (ASTM E 492) up to 73.
Yes, it offers up to 85% rh for protection against moisture. If you need more moistur eprotection use PU 280 as it offers up to 95%-100%
Yes, it can be used for both engineered and solid wood up to 8″ wide.
Loba MS 260 is easy to spread, super strong at holding wood but still being able to move with the seasons and is easy to cleanup. With MS 260 being able to go to 8″ wide boards that should take care of 90% of your installations.
Ceramic particles make the finish that much harder. Ceramic is tougher than anything else in waterbased, oilbased or swedish finish.
Why not? if you get your floors refinished every 30 years why not protect them with the best finish a company offers. While more expensive you get all the bells and whistles. Loba Supra A.T. is mainly made for commercial projects.
No, this is a fast drying ceramic product. It is not as easy to apply this finish as EasyFinish.
Supra A.T. is the fastest drying waterbased finish on the market. This makes it ideal for commercial projects.
LOBA Roller Microfiber 100/120: apply at 400-500 square feet per gallon per coat.
You can use any method, it is hard to see mistakes with this finish. Perferred is t-bar or roller.
Loba says that Invisible only needs 2 coats, but we have found 3 to be a safer bet for durability.
The beauty of this product is that you use the same product for all 3 coats. You will never see a difference in color after moving to step #2 and #3.
Let’s just say you will not be using Bona natural sealer anymore after trying this.
Litterly it looks like nothing is on the floor. You might think the contractor did nothing.
While the EasyPrime sealer by Loba pops the colors and makes all wood species look great, it does not amber or change the color of the wood too much. It fits todays design protocols.
If the coating is put down and recoated within 18 hours you will be good to hot coat this sealer. Hoever, it might be ideal to buff to get any grain raise gone and for the smoothest floor.
It is recommended to use a roller or t-bar to apply the EasyPrime sealer.
No, this sealer works on almost all woods, is easy to apply and leaves no lap marks!
It is not advised to use it on a commercial job. It is recommended to use a 2 componenet finish like a Loba Duo or Supra.
Like anyother 1 component finish, you generally can apply these with any method you would like. This means a roller, t-bar, pad, or brush.
That is the beauty of 1 component waterbased finishes, you are able to use half and save the rest for the next job without losing any money!
Yes, Loba EasyFinish is a one component finish which tend to be easier to apply than 2 componenet finishes.
No, since this product is mixed you are unable to save it.
Roller is the best according to Loba but a t-bar is used by a lot of people as well. There really is no “best” way to apply – it is what you are most comfertable with.
By cure menaing fully done hardening – 3 days. For walking on while it fully cures 8-12 hours. Loba doesn’t dont recommend putting rugs down till after fully cured.
Yes, this is a 2 component product dries fast. In terms of durability it is as strong as other 2 component finishes.
Yes, you just need a trowel and you being going left to right with the putty. Make sure to keep the putty as thin as possible while applying.
Take a wet cloth and rub it out. The wood filler does not bond to carpet.
The colors wood filler comes in are: maple ash pine, red oak, white oak, ebony, walnut & cherry.
Yes, the Duraseal trowable wood filler dries in about 20-40 min and is sandable directly after.
Roller or t-bar is the perferred method of applying the DUraseal waterbased polyurethane.
Yes, you are able to hot coat the floor. We recommend hot coating within 12 hours to get best adhesion.
Yes, for up to a year, the finish should be good to use on multiple jobs.
Duraseal Waterbased Polyurethane makes your wood have the look oil but the ease of waterbased finish.
You can use mineral spirits or paint thinnner to get it off. However, be careful and test a spot first because it can dull other finishes.
You can stain any wood. However, we recommend not staining maple as it can look uneven, blotchy or curly.
Stain can combust if not handled correctly. It is best practice to put rags on the grass/rocks 1 by 1 while staining. Never pile rags on top of eachother. Once done staining you should put them in a metal pail full with water.
Yes, you are able to buff on DuraSeal stain on.
The best stains are oil-based. The colors are deeper & look better. Waterbased stains look just plain strange.
THis is normal. The oil penetrates differently on different grain. The next coat should fill in 90-95% of this and a 3rd coat would fill it in if needed.
No, you will be buffing this sealer anyways so solids are not a major problem or concern.
No, the only different is the solids amount so you can begin buffing faster. The look is the exact same as oil-based polyurethane.
Quick Dry Sealer has more solvents that evaporate faster.
Yes, oil-based polyurethane does give a better depth and look to the floor.
While this question exists, it is more about maintenance and how you treat your floor. If you wear socks, both oil and water finishes last forever. If you are wearing shoes that are dirty – your wear will be increased 10x. But, techincally speaking oil-based products are just as durable, they just amber and take longer to dry.
We would recommend a roller as it is easier to get a thinner coat and have it level perfectly. Sometimes a t-bar can leave heavy lines or shiny spots.
This is probably one of the easiest finishes to apply to a hardwood floor. The Duraseal oil-based Polyurethane wood floor finish is a go to for many people.
For commercial projects we would recommend DuraSeal DuraClear Max. This finish by Duraseal dries fast, is extremely durable and has little odor.
Yes, Duraseal DuraClear Max is able to be hot coated. You need to hot coat ideally within 12 hours so the adhesion is the best possible.
Yes, you are able to roll DuraClear Max. However, 2 component finishes are harder to roll since they dry faster.
Once mixed you only have 6 hours to use or it will begin to harden and be impossible to level on the floor.
Yes, you are able to apply DuraClear Max over Duraseal Stain with no sealer. We recommend to wait overnight for the stain to fully dry.
For a house, Duraseal Duraclear finish is great. We do not recommend for commercial applications since the 2 component dries and cures faster. Did you know most “scratches” on your floor are not the finish scratching but the wood denting.
Yes, Duraseal Duraclear can be applied on top of dried stain with no isses or a need for a sealer.
Yes, this 1 component finish can be used on a job and saved for the next job. Just make sure the cap is on tight so no air can get in to let the finish harden.
You are able to roll, t-bar or pad Duraseal Duraclear finish. Whatever method you are most comfertable with is ideal to use with this finish.
Duraseal Duraclear is a 1 component finish. You do not need to mix anything into this finish.
Absolutely, vibrant will make the colors pop more and seem deeper like an oil-based finish. We recommend to put it over stain!
It is perferred to roll the Vibrant sealer on. You are able to t-bar it as well.
Vibrant is no different than like a Pallmann or bona sealer. It works and acts the same. The tinting sealers can be slightly harder to work with than clear sealers.
Its not really a color but more of a hue change. Arboritec Vibrant makes the colors dark and pop more. Imagine a oiled floor but only 50-75% of the color, tha tis what Vibrant looks like.
Unlike other brands, you are able to top coat this finish with avenue after applying it. If you do not like the sheen or look, it is a simple fix!
Absolutely, Miracle Oil is super simple to use and apply. There is virtually no way to get overlaps or odd issues of traditional finish. Miracle Oil is penetrating so different film thicknesses and other related issues with finish does not occur with Miracle Oil.
People get hung up on that this finish is a 1 coat process and it can’t be durable. However, it penetrates the wood and performs and works different than traditional finishes. This finish is durable and is easy to maintain over time. It is great for businesses.
You will notice the solids are 100% traditionally waterbased is around 32% solids. Because the solids are so high, it will go further.
It is recommended to trowel the oil on and then buff it off with rags or bonnet after 15 – 30 min.
Just like any other waterbased finished floor, we recommend using a pH neutral floor cleaner. a pH neutral cleaner will clean the floor but also not break down the finish and have it prematurely wear down.
Yes, you can do a maintenace coat if you would like. The ideal process is to:
- clean the floor
- Buff the floor with clean n coat
- Tack floor with microfiber pad
Finally apply Genuine Naked to the flooring.
Yes, Genuine Naked is durable. Naked finish uses a hardener to make it a strong finish and a viable product for commercial projects.
The perferred method is to apply this product with a roller. You are also able to use apad or t-bar.
You will want to seriously shake Arbroitec Genuine Naked product. The matting agents need to be mixed and stirred for atleast 2 minutes. Failing to shake effectively will make it hard to apply this finish perfectly. We also advise shaking the can every 15 min to ensure that the matting agents dont drop down.
The floor will have a very low sheen, probably one of the lowest in the industry. If you are looking to not see a reflection, this is the finish for you.
Both sealers that Arboritec offers are able to be used in conjunction with Genuine 5. Those flooring sealers are First Coat and Vibrant.
With all Arbvoritec flooring finishes, you should be shaking and/or mixing the finish for about 1-2 minutes. If the coat isn’t going as fast as normal we recommend shaking periodically to ensure the finish doesnt have the matte agents settling mid coat.
Arboritec recommends a roller for more even coat. However, you are also able to use a t-bar.
Suprisingly, this finish is easy to apply and works just like Avenue does. Arboritec hit it out of the park with this flooring finish.
You might need to see it to believe it, but you will not see a reflection in this finish. Genuine 5 finish is absolutely a ultra matte finish.
While everyone’s opinion is different… we would say this sealer looks like a Pallmann Clear, Loba EasyPrime or Bona ClassicSeal. First Coat is clear in appearance but does look like finish on the floor and isn’t a raw wood floor look.
No, First Coat Sealer is a 1-component sealer that is not mixed. This means this sealer can be used on multiple jobs and is good for 6-12 months after opening.
You are able to put Arboritec First Coat sealer on top of stain. However, we recommend skipping sealer or using Vibrant sealer to make the stain pop more.
Yes, you are able to sand First Coat sealer. We recommend using 180g or 220g to intercoat abrade with. You are also able to hot coat this sealer.
You are able to apply Arboritec First Coat however you normally apply waterbased sealer. We recommend rolling or t-bar.
Yes, you are able to coat stain directly over with Arboritec Classic+ finish. If you want a more vibrant look, we recommend using Vibrant sealer to make the stian pop more. Then coat the floor with Classic+ after Coating the floor with Vibrant.
We recommend using First Coat or Vibrant sealer by Arboritec. These sealers are meant to work with all the Arboritec finishes. However, if you buff you are able to use other sealers if needed.
Yes, you can roller Arboritec Classic+. You are also able to use a t-bar and pad as well.
Classic+ is an easy finish to apply. You will notice it is generally easier to use than Avenue. The reason for the ease of use is because it is a 1 part componenet, with no hardener you have longer open times for workability.
Yes, all Arboritec finishes use ceramic in thier finishes to increase durability.
Yes, Arboritec Classic+ finish is very durable. While it is a 1 componenet finish that doesn’t mean it isn’t durable. You will get about 85% of the durability of a 2 part finish. Most residential homes will never notice a difference.
No, Arboritec Classic+ finish does not go bad if you do not use it all at one time. This finish does not use a hardener so the pot life is not an issue. This finish should be good for 6-12 months after opening.
Absolutely. We recommend adding the harender then shaking the Avenue finish vigorously for 2 minutes to get proper mixing of the chemicals. After shaking Avenue Let the finish sit for 2-3 minutes and then begin coating. The wait period is important so that the air can escape for a better result and ease of use.
Yes, Arboritec Avenue is hot for about 4 hours and then begins to harden and making the bottle grow. You will want to mix this finish and then apply it within 1-4 hours for best results. After this time period the finish will be impossible to have level and look good.
While arboritec dries fast and has cermaic particles, this finish is relatively easy to apply. This finish can be applied by t-bar, pad or roller. Like anyother 2 componenet waterbased finish, you will have less time to apply than a 1 componenet-non hardened finish.
Yes, Avenue finish requires a hardener to dry faster and harder. The hardener is the special magic. Interesting fact, the sheen is not adjusted by the hardener like some other companies.
This just might be the hardest and most durable waterbased flooring finish on the market today. This finish offers ceramic particles that add to the strength and durability. While usually ceramic makes it hard to spread and let the finish level, this finish has mastered both.
Absolutely. This company is 100% american made, use forests that are monitored with mandated practices. THis product is 100% USA made!
The widths wd offers are 1-1/2″, 2.25″, 3.25″, 4″ and 5″ for their wood products.
WD Flooring is strictly a northern company. The WD Flooring companes from Laona, Wisconsin. Northern wood is tighter, less variation and looks amazing.
While antedotal, we did a test in our offices. A normal unfinished & prefinished plank were submerged in water takes on around 18% moisture overnight. The Ten Oaks sealed took on 2% of moisture. Both tests were done in the same sink, same water and for the same period. It is amazing how much moisture was repelled and not let into the wood to make it change size and shape!
Suprisingly, yes! While the wood waits at the mill and is being transported it is interesting how much a wood plank can move. The wood being sealed make sit so the wood is unable to bow or move while transporting. The Ten Oaks flooring is some of the straightest wood because of the full seal on the wood flooring.
It is recommended to wait till the house is closed up and the painting is done as the moisture can be very high. However, once this is done you do not need to acclimate the wood, you are able to install day of delivery wihtout fear of the floor not being flat.
Yes, glueing the floor down is perfectly fine. Ten Oaks has approved the use of Pallmann and Loba glues. You do not need to do anything special, you can glue right to the back of the board with the seal on it.
Yes, the baords are fully sealed for moisture but after installation it is recommended you sand the floor with a 60g or lower belt then proceed as normal with your normal sanding sequence. After sanding it is ideal to put a coat of stain or oil/water based finish before 48 hours to ensure the moisture doesn’t change.
Words cannot describe how maticulous and amazing hillsboro hardwood flooring is. The people who mill this flooring care and make sure each and every bundle is perfect. If you are looking for a tight tounge and groove Hillsboro hardwoods is the best option. It might sound crazy, but the beter milled the wood is the better the floor will look, last and perform. While Hillsboro is the one of the best mills, that also means thier prices are slightly higher to reflect the workmanship & craftsdmanship of their work.
As always Rustic Wood Floor Suppyl take smoisture reding sbefore delivering the wood to any house or business. We only deliver wood 6-9% moisture. If the reading comes higher we will not deliver this wood. Typically hillsboro wood is 7-7.5% moisture which is a great moisture content for the pacific northwest as we are a drier climate that requires better kiln dried wood for long term performance. You will notice that since Hillsboro Hardwoods wood has a good kiln drying process and is delivered at 7%~ moisture the end product of the floor is very flat.
What makes hillsboro different is the craftsmanship and workmanship the company provides to their product. You are able to tell the difference between a smaller mill – we call them botique – and a larger mill that mass produces wood at a lower price. Sometimes, it is better to pay a few cent smore for a better end product that you know will last decades. Some key points of the HIllsboro Hardwood floors you might be interested in knowing are:
- Amazing milling
- MIlling means your floor will stay tight, no random, funky noises and just a genrally better install
- Over/Underwood is the best in the industry (less sanding is needed)
- Little to no over/underwood means less sanding and less work after installation. This just shows how great the end product will be!
- Good lengths
- You get nic elong boards with only a few shorts. Every flooring manufacturer must stck to the NWFA guidelines, HIllsboro exceeds these for a better looking floor.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.