Bona Sport Poly Oil Finish – 450/350/275

Additional information

VOC

550 VOC, 350 VOC, 275 VOC

Brand

Bona

Atlanta Office: (678) 691-0533

Boise Office: (208) 982-5749

Spokane Office: (509) 921-5585

Advantages and Specifications of Bona Sport Poly Oil Finish:

  • Multiple VOC Offerings
  • Easy to Use
  • Dries fast
  • Super glossy
  • Great Grip
  • Long Lasting
  • Works Great with Sport Seal

Product Brand: Bona
Product Currency: USD
Product Price: $170.78
Product In-Stock: Yes
Rustic’s Rating⭐⭐⭐⭐⭐

Bona Sport Poly Oil Finish sets the industry standard for gym flooring with its robust, high-build formula. Notice the superior gloss level upon entering, showcasing its toughness. Available in 450, 350, and 275 varieties, catering to different VOC regulations, it suits diverse needs. Its mild amber tint and self-leveling properties make it ideal for various gyms. This top coat is chemical-resistant, standing up to sweat and cleaning products. Tried and tested for decades, Bona Poly remains a glossy gym favorite. Note: Apply with minimal airflow, at a 450 sq ft. per gallon spread rate, and buff between coats, as recommended by Bona.

Bona Sport Poly Oil Finish 450/350/275 Advantages Help & FAQ’s

How long does it take for Bona Gym Oil-Based Flooring Finish to cure, and when can the gym be reopened for use after application?2023-12-10T19:33:00+00:00

As of my last knowledge update in January 2022, I don’t have specific details on the drying and curing times for Bona Gym Oil-Based Flooring Finish. The curing time for oil-based finishes can vary based on several factors, including the specific product formulation, environmental conditions, and the application thickness.

In general, oil-based finishes typically have longer drying and curing times compared to water-based finishes. Here are some general guidelines, but it’s crucial to refer to the specific product’s technical data sheet and application instructions for accurate information:

  1. Drying Time:
    • The initial drying time for each coat of oil-based finish can range from overnight to 24 hours. However, it’s essential to check the product specifications, as drying times can vary.
  2. Curing Time:
    • Full curing for oil-based finishes can take several days to weeks. It’s common to wait at least 24 to 48 hours before allowing light foot traffic and several days to a couple of weeks before heavy use or placing equipment on the gym floor.
  3. Ventilation:
    • Adequate ventilation is essential during and after the application of oil-based finishes. Proper airflow helps facilitate the drying and curing process.
  4. Temperature and Humidity:
    • Environmental factors, such as temperature and humidity levels, can significantly impact the drying and curing times. Warmer temperatures and lower humidity levels generally promote faster curing.

Always follow the specific guidelines provided by Bona for the particular Gym Oil-Based Flooring Finish you are using. The manufacturer’s technical data sheet or application instructions will offer detailed information on drying and curing times, as well as any specific recommendations for optimal results.

If you have a specific product in mind or if there have been updates since my last knowledge update in January 2022, I recommend checking with Bona directly or consulting the most recent product documentation for accurate and up-to-date information on drying and curing times for their oil-based finishes.

What is the recommended maintenance routine for gym floors treated with Bona Oil-Based Finish?2023-12-10T19:33:26+00:00

Maintaining gym floors treated with Bona Oil-Based Finish involves regular cleaning and periodic maintenance to ensure the longevity and appearance of the finish. Here’s a recommended maintenance routine:

Regular Cleaning:

  1. Sweep or Vacuum Daily:
    • Remove dust, dirt, and debris from the gym floor regularly using a soft-bristle broom or a vacuum cleaner with a soft brush attachment.
  2. Damp Mop Weekly:
    • Damp mop the gym floor weekly using a well-wrung, damp microfiber mop. Use a pH-neutral cleaner specifically designed for hardwood floors or follow Bona’s recommendations for compatible cleaning solutions.
  3. Avoid Excessive Moisture:
    • While damp mopping is acceptable, avoid excessive moisture on the gym floor. Water should not be left standing, as it can damage the finish and the wood.

Periodic Maintenance:

  1. Deep Cleaning:
    • Periodically perform a deeper cleaning using a Bona-certified deep cleaning system or a compatible deep cleaning solution recommended by Bona. Follow the manufacturer’s instructions for application.
  2. Scuff and Stain Removal:
    • Promptly clean scuff marks or stains using a Bona-approved cleaner or a solution recommended by Bona. Avoid using abrasive cleaners, as they can damage the finish.
  3. Reapply Maintenance Coats (if needed):
    • Depending on the level of wear and tear, consider applying maintenance coats of Bona Oil-Based Finish as recommended by the manufacturer. This can help refresh the protective layer and maintain the floor’s appearance.

Preventative Measures:

  1. Use Area Rugs or Mats:
    • Place area rugs or mats in high-traffic areas, near entrances, and beneath gym equipment to reduce the risk of scratches and wear.
  2. Furniture Pads:
    • Attach felt or soft rubber pads to the legs of furniture to prevent scratches and dents when moving or rearranging equipment.
  3. Regular Inspection:
    • Regularly inspect the gym floor for any signs of wear, damage, or changes in the finish. Address any issues promptly to prevent further damage.
  4. Control Humidity Levels:
    • Maintain stable humidity levels in the gym to prevent wood expansion or contraction. This is particularly important if the gym floor is exposed to significant changes in humidity.
  5. Avoid High Heels and Sports Cleats:
    • Restrict the use of high-heeled shoes and sports cleats on the gym floor, as these can cause excessive wear and damage to the finish.

Always refer to the specific care and maintenance guidelines provided by Bona for the particular Oil-Based Finish product you’ve used on your gym floor. Following the manufacturer’s recommendations ensures that you are using products and methods that are compatible with the finish, helping to maintain the floor’s beauty and durability over time.

How should I prepare the gym floor before applying Bona Oil-Based Finish, and are there any special considerations for different types of wood?2023-12-10T19:34:11+00:00

Proper preparation of the gym floor is crucial to ensure the successful application and performance of Bona Oil-Based Finish. Here are general steps for preparing the gym floor, along with considerations for different types of wood commonly used in gym flooring:

General Gym Floor Preparation:

  1. Clean the Surface:
    • Thoroughly clean the gym floor to remove dust, dirt, and any contaminants. Sweeping or vacuuming is usually the first step.
  2. Repair Imperfections:
    • Inspect the floor for any cracks, gaps, or imperfections. Fill these areas with an appropriate wood filler or patching compound and ensure a smooth surface.
  3. Sand the Floor:
    • Sand the entire gym floor to create a smooth, even surface. The level of sanding required may depend on the condition of the existing finish and the specific Bona Oil-Based Finish product being used.
  4. Remove Sanding Residue:
    • After sanding, use a vacuum or damp mop to remove any sanding residue. It’s crucial to start with a clean surface to promote proper adhesion of the oil-based finish.
  5. Check Moisture Levels:
    • Ensure that the moisture content of the wood is within the acceptable range specified by the Bona Oil-Based Finish product. Excessive moisture can affect the performance of the finish.

Considerations for Different Types of Wood:

  1. Hardwood vs. Softwood:
    • Hardwood and softwood may have different porosities and characteristics. Adjust the sanding process and the amount of finish applied based on the specific wood type.
  2. Maple Flooring:
    • Maple is a common wood type used in gym flooring. It’s important to note that maple can be dense and non-porous. Some oil-based finishes are specifically formulated for dense woods, so check the product specifications to ensure compatibility.
  3. Pine Flooring:
    • Pine is a softer wood that may require a different approach. Ensure proper sanding to create a smooth surface, and choose an oil-based finish suitable for softer woods.
  4. Exotic Woods:
    • Exotic woods may have natural oils or resins that can affect adhesion. Clean the surface thoroughly and, if necessary, use a compatible wood cleaner before applying the oil-based finish.

Application Specifics:

  1. Stir the Finish:
    • Before applying the Bona Oil-Based Finish, stir the product thoroughly to ensure an even distribution of solids.
  2. Apply the Finish:
    • Use a high-quality applicator, such as a synthetic brush or applicator pad, to apply the oil-based finish. Work in the direction of the wood grain.
  3. Allow Drying Time:
    • Follow the manufacturer’s guidelines for drying time between coats. Oil-based finishes typically have longer drying times compared to water-based alternatives.
  4. Apply Additional Coats (if needed):
    • Depending on the desired level of protection, apply additional coats following the same process.

Always refer to the specific product’s technical data sheet and application instructions provided by Bona for accurate and detailed information tailored to the oil-based finish you are using. Following these guidelines and considering the wood type will help ensure optimal results and the longevity of the gym floor finish.

What are the key advantages of using Bona Gym Oil-Based Flooring Finishes in a gym environment?2023-12-10T19:34:39+00:00

As of my last knowledge update in January 2022, I don’t have specific details about Bona Gym Oil-Based Flooring Finishes. However, I can provide general advantages that are commonly associated with high-quality oil-based flooring finishes. Keep in mind that the specific benefits may vary depending on the formulation of the product. Always refer to the product’s technical data sheet and consult with the manufacturer for accurate and up-to-date information. Here are some general advantages:

  1. Durability:
    • Oil-based finishes are known for creating a durable and robust protective layer on gym floors. This helps withstand heavy foot traffic, equipment use, and other stresses common in gym environments.
  2. Rich Appearance:
    • Oil-based finishes often enhance the natural beauty of wood, providing a warm and rich appearance to the gym floor. The finish can deepen the color and highlight the grain patterns.
  3. Penetrating Formula:
    • Oil-based finishes typically penetrate deeper into the wood fibers, providing enhanced protection from within. This can be advantageous for long-term durability.
  4. Scratch Resistance:
    • Oil-based finishes can offer good scratch resistance, helping to maintain the appearance of the gym floor even in high-traffic areas.
  5. Repairability:
    • In the event of localized damage or wear, oil-based finishes can be spot-repaired more easily compared to some other types of finishes. This can be beneficial for maintaining the appearance of the floor over time.
  6. Moisture Resistance:
    • Oil-based finishes can provide a degree of moisture resistance, which is important in environments where spills or moisture exposure may occur.
  7. Deep Penetration:
    • Some oil-based finishes are designed to deeply penetrate the wood, providing additional protection against wear, moisture, and other potential issues.
  8. UV Protection:
    • Certain oil-based finishes may offer UV protection, helping to reduce the impact of sunlight exposure on the gym floor. This can prevent fading and discoloration over time.
  9. Applicator Friendly:
    • Oil-based finishes are often favored by professionals for their application characteristics. They can provide a smooth and even finish when applied properly.
  10. Versatility:
    • Oil-based finishes are typically suitable for various types of wood commonly used in gym flooring, offering versatility in application.

It’s important to note that while oil-based finishes have these advantages, they may also have specific application requirements and considerations. Always follow the manufacturer’s guidelines for proper application, drying times, and maintenance to achieve the best results and maximize the benefits of the chosen Bona Gym Oil-Based Flooring Finish.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Go to Top