Loba Invisible

Loba Invisible2023-01-18T03:55:44+00:00
Loba 2k Invisible protect

Key Beneifts of Invisible

  • Super easy to apply
  • No lap Marks
  • Simple 3 coat system
  • Unlike anything else competitors offer

Loba’s 2k Invisible Protect is an innovative 2-component water based surface coating that gives your floors the look and feel of natural untreated hardwood while offering all of the protection of a finished floor. This invisible protectant is extremely scratch-resistant and offers outstanding chemical and wear resistance in high traffic environments. It’s high durability and easy cleaning make it the perfect surface treatment for lovers of natural wood!

If you are looking for a ultra-matte floor that looks like it is unsanded, this might be the best option on the market.

SDS
TDS
Find a Floor Expert

Invisible Inspiration Photos

Loba Invisible FAQ’s

Which roller should I use with Loba Invisible?2022-08-18T01:58:35+00:00

LOBA Roller Microfiber 100/120: apply at 400-500 square feet per gallon per coat.

How should I apply Loba Invisible?2022-08-18T01:57:25+00:00

You can use any method, it is hard to see mistakes with this finish. Perferred is t-bar or roller.

Should I apply 2 or 3 coats?2022-08-18T01:56:37+00:00

Loba says that Invisible only needs 2 coats, but we have found 3 to be a safer bet for durability.

What if I miss a spot?2022-08-18T01:55:50+00:00

The beauty of this product is that you use the same product for all 3 coats. You will never see a difference in color after moving to step #2 and #3.

Is this easier to apply than other “natural” looking finishes?2022-08-18T01:54:55+00:00

Let’s just say you will not be using Bona natural sealer anymore after trying this.

Is this finish really that matte?2022-08-18T01:54:04+00:00

Litterly it looks like nothing is on the floor. You might think the contractor did nothing.

Technical Specs for Loba Invisible

Coverage Approx. 400-500 sq ft per gallon
Storage & Working Temp: Store between 50° and 70°F (10-20°C)* and apply at room temperature 65-80°F (18-25°C) for best results**
Application Tools: T-Bar applicator, brush, cut-in pad or waterborne roller.
Defoaming: Excellent
Leveling: Exceptional
Fully Cured: After approx. 5 days**
Foot Traffic: After approx. 4-8 hours**
Drying Time: Approx. 30-90 min hours**
Pot Life: 4 hours
Packaging 1 U.S. plastic gallon
Clarity: Clear when dry, non-yellowing (not UV sensitive)
Stability: Min. 12 months*
VOC Content: VOC does not exceed 135 grams per gallon
Gloss Level (60˚): 5
Sheens: Matte
Solids: 32%
Odor: Non-offending
Color Milky when wet, clear when dry
Recommoned Uses: Residential & Commercial
Go to Top